how to change a tire on a double axle travel trailer

How to Change a Tire on a Double Axle Travel Trailer

By Kevin Moore
AD

Changing a tire on a double axle travel trailer may seem like a daunting task, but with the right tools and steps, it can be an achievable task for any adventurous camper. Whether you're new to travel trailer maintenance or an experienced RVer, it's crucial to understand how to handle a tire change safely and efficiently.

Before we dive into the detailed steps, let's familiarize ourselves with the necessary tools and some safety precautions. You will need a jack, lug wrench, spare tire, wheel wedges, and a flashlight for nocturnal emergencies. Always ensure you're parked on a stable, level surface, and never attempt to change a tire on a moving trailer. Now, let's embark on this step-by-step guide to changing a tire on a double axle travel trailer.

Assessing the Situation and Preparing Your Trailer

First, inspect the damage. A slow leak, audible noise, or a visible bulge or cut can indicate a tire in need of changing. Once you've identified the problematic tire, it's time to prepare your trailer for the change.

AD
How To Change A Tire On A Double Axle Travel Trailer – Vehicle HQ
How To Change A Tire On A Double Axle Travel Trailer – Vehicle HQ
How To Change A Tire On A Double Axle Travel Trailer
How To Change A Tire On A Double Axle Travel Trailer
How To Jack Up A Dual Axle Travel Trailer | RV Expeditioners
How To Jack Up A Dual Axle Travel Trailer | RV Expeditioners

Stabilize your trailer by engaging the parking brake and using wheel chocks to prevent any unwanted movements. Safety should always be your top priority when handling loaded travel trailers.

Locating the Spare Tire and Jack

Begin by finding your spare tire and jack. In most travel trailers, these are stored beneath the exterior storage compartments. Be sure to check your owner's manual for the exact location on your specific trailer model.

How To Jack Up A Dual Axle Travel Trailer? - Camper Upgrade
How To Jack Up A Dual Axle Travel Trailer? - Camper Upgrade
Do Travel Trailer Tires Need to Be Balanced?
Do Travel Trailer Tires Need to Be Balanced?

Recovering the spare tire and jack may require some strength, and it's helpful to have a partner to assist you. Use caution when lifting heavy objects to avoid injury.

Jacking Up the Trailer

Once you have your tools, place the jack beneath the trailer's frame near the tire that needs changing. Most trailer frames have specific points designated for tire changes, so locate and use one of these.

AD

Slowly lift the trailer off the ground using the jack. When lifting, the jack should make a grinding noise. If it suddenly becomes quiet, stop lifting immediately, as this could indicate that you've reached the maximum lifting height or the jack is slipping.

Removing the Wheel and Installing the Spare

With the trailer lifted off the ground, it's time to remove the troublesome tire and replace it with the spare.

Using the lug wrench, loosen the lug nuts on the tire by turning them counterclockwise. Most tires require a half to three-quarters of a turn to loosen. Once you've loosened all the lug nuts, remove them completely and place them safely where they won't roll away.

AD

Unseating the Tire

With the lug nuts removed, push down on the tire to unseat it from the wheel base. In some cases, you may need to use a bit of force. Be cautious not to damage the lug studs or the rim.

Place the spare tire onto the wheel base and reattach the lug nuts by hand, turning them clockwise until they are snug. Do not tighten them all the way at this point, as the issue of three cross threading can make them incredibly difficult to remove later on.

Lowering and Securing the Trailer

Using the jack, slowly lower the trailer until it's back on the ground. Once it's stable, fully tighten the lug nuts using the lug wrench. Apply some downward pressure on the wrench as you turn clockwise to ensure a tight fit.

AD

Toe the wheel by turning it slightly left or right from the center position. This helps distribute wear on the spare tire evenly.

Storing Your Tools and Jack

With the spare tire securely attached, stow your jack, lug wrench, and any other tools you used back in their original storage locations.

Before continuing your journey, double-check that all tools are securely stowed and out of the way. Always remember to communicate with your travel partner and follow proper safety procedures when handling loaded travel trailers.

Congratulations! You've successfully changed a tire on your double axle travel trailer. Regular tire maintenance and understanding how to handle emergencies like tire changes will make your travels safer and more enjoyable. Now that you're equipped with this knowledge, get back on the road and explore with confidence.

AD