how to change a craftsman circular saw blade

Step-by-Step: Replace Blade on Craftsman Circular Saw

By Melissa Taylor
AD

Need to replace that worn-out blade on your Craftsman circular saw? No worries, it's a simple task that requires minimal effort and ensures your tool remains efficient and safe. Let's walk you through the process of changing a Craftsman circular saw blade in a step-by-step guide.

Before we dive into the procedure, remember to always prioritize safety when handling power tools. Ensure your circular saw is unplugged, and all parts have cooled down before starting.

Preparation and Gathering Tools

First, collect your tools and materials. You'll need:

AD
How To: Change a Circular Saw Blade - The Craftsman Blog
How To: Change a Circular Saw Blade - The Craftsman Blog
a woman is using a circular saw to cut wood with the words circular saw tutor
a woman is using a circular saw to cut wood with the words circular saw tutor
How to change Makita circular saw blade
How to change Makita circular saw blade
  • New circular saw blade
  • Pear-shaped Allen key (comes with the saw)
  • Safety glasses
  • Work gloves

Ensure your new blade matches your saw model and has the correct arbor size and blade diameter.

Unplug and Secure the Saw

Begin by unplugging the saw from the power source to prevent any accidental startups.

a man holding a circular saw on top of a piece of wood next to a hole in the ground
a man holding a circular saw on top of a piece of wood next to a hole in the ground
How to Change the Blade in a Circular Saw
How to Change the Blade in a Circular Saw

Lay the saw on a stable surface, and use a clamp or a helps to secure the base plate. This will keep the saw steady and prevent wobbling while you work.

Remove the Blade Guard and Adjusting Ring

Use the pear-shaped Allen key to loosen and remove the blade guard screw. Slide the guard out of the way.

AD

Next, grasp and turn the adjusting ring counterclockwise to move it away from the blade. Use an Allen wrench to remove the set screw securing the ring in place.

Removing the Old Blade

Now that you have cleared the path, it's time to remove the old blade.

Loosen the Blade Lock Nut

Use your fingers to loosen the blade lock nut. You may need to use a wrench if it's too tight. Turn the nut counterclockwise until you can remove it by hand.

AD

Remove the Old Blade

With the lock nut removed, use your fingers to pull the old blade out from the saw. Always pull the blade away from the saw, not downwards, to minimize the risk of injury.

Installing the New Blade

Now that the old blade is out, you're ready to install the new one.

Insert the New Blade

Insert the new blade into the saw's arbor. Ensure the arrow on the blade's side points towards the side of the saw where the handle is located, as this is the intended rotation direction.

AD

Secure the New Blade

Slide the blade lock nut back onto the arbor, and use your hand (or a wrench if necessary) to tighten it. Ensure the nut is secure but not excessively tight.

Reassemble and Test

Put the adjusting ring and blade guard back onto the saw, ensuring they're secure and aligned correctly. Tighten the adjusting ring set screw to secure it in place.

Plug in the saw and check that the blade spins freely and in the correct direction. If everything looks good, you're all set to tackle your next project!

There you have it, a complete guide on changing a Craftsman circular saw blade. Always remember to prioritize safety and follow these steps carefully for a smooth and efficient process. Happy sawing!

AD