how to build roll away nesting boxes

Mastering DIY: Build Roll-Away Nesting Boxes

By Richard Martinez
AD

Building nest boxes for your feathered friends can be a rewarding task, not just for the birds, but also for yourDIY skills. Roll-away nesting boxes are particularly popular due to their innovative design that allows easy cleaning and predator protection. Here's a step-by-step guide to help you build your own roll-away nesting boxes.

Before you start, gather your materials. You'll need:

- Untreated wood : Cedar or pine are good choices, about 1" thick. - Hinges and latch : Galvanized or stainless steel to prevent rust. - lywood or MDF : For the removable front panel. - Screws : Appropriate size for your chosen wood and hardware. - forgot to mention the size of the nesting box. For a bluebird box, it would typically be 5" x 5" x 12". You can adjust the size based on the bird species you want to attract. For this guide, let's assume we're building a bluebird box.

Design and Dimensions

Understanding the ideal dimensions and design is crucial for attracting your desired birds. For our bluebird box, the dimensions will be 5" x 5" x 12".

AD
Rollaway Nesting Box Plans using paint trays
Rollaway Nesting Box Plans using paint trays
Simple DIY Roll Away Nesting Boxes
Simple DIY Roll Away Nesting Boxes
How to Make Roll Away Nest Boxes
How to Make Roll Away Nest Boxes

Bluebirds prefer a hole size of 1.5" in diameter to enter their nest box. Ensure the box has good ventilation and drainage by drilling small holes in the bottom and on the sides, at least 2" from the floor.

Building the Box

Start by cutting your wood pieces to size:

DIY Roll Away Nest Boxes
DIY Roll Away Nest Boxes
DIY Roll Away Nesting Box using a Paint Tray
DIY Roll Away Nesting Box using a Paint Tray
  • The back and sides will be 5" x 5".
  • The floor will be 5" x 6" (to allow for the slanted design of the roll-away feature).
  • The removable front panel will be 5" x 12".

Assemble the box by attaching the sides to the back, using the floor piece as the base. Ensure the box sits level.

Creating the Roll-Away Mechanism

To create the roll-away feature, you'll need to make a slanted floor and attach it to the box using hinges.

AD

First, cut two 2.5" x 1" pieces of wood, slanted at one end. These will act as the "rollers" that allow the floor to move.

Attach these rollers to the inside of the box, at the bottom, using screws. Position them so the floor can slide back and forth smoothly.

Installing the Removable Front Panel

The removable front panel provides easy access for cleaning. It should be attached with a latch that can be unhooked from outside the box.

AD

Attaching the Hinges

Attach two hinges to the inner sides of the box and one near the top. Ensure they're aligned so the panel closes properly.

Attach the corresponding part of the hinges to the removable front panel. Make sure the panel swings open easily but stops when pulled out completely, allowing the box to be rolled away.

Adding the Latch

Drill two small holes in the box and one in the front panel, aligning them when the panel is closed. Insert the latch through these holes, ensuring it secures the panel in place.

AD

Congratulations! You've now built your own roll-away nesting box. Install it on a pole or post, at least 5 feet off the ground, facing between northeast and southeast for ideal sunlight and warmth. Keep an eye out for your feathery tenants moving in!

AD