How to Build a Roll-Away Nest Box
Building a roll-away nest box is an excellent way to ensure the safety and comfort of your chickens while also making egg collection an easier task. A roll-away nest box allows you to shift the box's position to collect eggs without disturbing the chickens. In this guide, we'll walk you through the process of building a DIY roll-away nest box that is both functional and durable.
Before we dive into the step-by-step guide, let's discuss the benefits of having a roll-away nest box. Firstly, it reduces egg predation as you can collect eggs without entering the coop, which minimizes stress for the chickens and predators. Secondly, it improves egg cleanliness as eggs aren't soaked in chicken droppings. Lastly, it enhances your egg collection experience by making it easier and less intimidating.
Materials Needed
Gathering the right materials is the first step in building your roll-away nest box. Here's a list of materials you'll need:
- Untreated plywood (3/4 inch thick) - 48 inches long and 24 inches wide
- 2x4 lumber - eight 36-inch long pieces
- 1/2 inch plywood - for the nest box panels (around 12 inches wide and 8 inches high)
- Wheel kit - with 4 to 6-inch casters
- Hinges and screws
- Eye bolts and cable
- Screws, power drill, and saw
- Roofing tin or shingles (optional, for added protection)
Building the Frame
Start by constructing the frame of the roll-away nest box. Cut four pieces of 2x4 lumber to 36 inches each, which will form the base of the frame. Attach them together using screws or wood glue to create a rectangular frame.
Next, attach another set of 2x4s to create the sides of the frame. Cut four pieces to 24 inches each and attach them to the base, creating a rectangular box. Ensure that the frame is square by measuring the diagonals and adjusting as needed.
Adding the Nest Box Panels
Once the frame is complete, it's time to add the nest box panels. Cut the 1/2 inch plywood into panels that are approximately 12 inches wide and 8 inches high. You can create multiple panels for each side of the nest box, depending on how many chickens you have.
Attach the panels to the interior of the frame using screws or hinges. Ensure that the panels are level and gap-free to provide a comfortable environment for your hens. You can also add a lip along the bottom of each panel to prevent bedding from spilling out.
Installing the Wheels
With the frame and nest box panels in place, it's time to install the wheels. Attach the wheel kit to the base of the frame, positioning two wheels on each side. Ensure that the wheels are securely attached and can roll smoothly across the ground.
Attaching the Nest Box to the Coop
To make the roll-away function possible, you'll need to attach the nest box to the chicken coop. Drill holes into the chicken coop's floor at the desired location for the nest box. Thread the eye bolts through the holes and secure them in place using nuts.
Thread a cable through the eye bolts and attach it to the nest box. This will allow the nest box to roll back and forth but prevent it from tipping over too far. Make sure the cable is taut but not so tight that it restricts the box's movement.
Finishing Touches
With the nest box built and installed, you can now add the finishing touches. If desired, add roofing tin or shingles to the top of the nest box for added protection from the elements. You can also paint the nest box to match the exterior of your coop and make it more visually appealing.
Finally, make sure to line the nest box with plenty of clean, dry bedding. This will provide your hens with a comfortable environment to lay their eggs. Now that your roll-away nest box is complete, you can enjoy easier egg collection and improved hen health.