how to blow out inground pool lines

How to Fix Blown-Out Inground Pool Lines

By Michael Walker
AD

Inground pools are not only gorgeous but also eco-friendlier than their above-ground counterparts. However, maintaining a clean and healthy pool water environment can present a unique challenge: pool lines or suction outlet holes prone to clogging or even blowing out. This can lead to improper water circulation, increasing the risk of algae and bacteria growth, and reduced pool safety. Here's a comprehensive guide on how to effectively diagnose and repair blown-out pool lines.

Blown-out pool lines, also known as suction-side pool line issues, occur due to a variety of reasons. Most common causes include dirt, debris, or tiny objects like pebbles or coins stuck in the lines, insufficient water pressure, or excessive water usage that stretches the pipes beyond their elasticity. Consequently, the pipes lose their shape and suction power, leading to unbalanced-des município, or even a complete lack of suction at the skimmer.

Identifying Blown-Out Pool Lines

Before troubleshooting, it's crucial to recognize the symptoms:

AD
How to Blow Out Your Swimming Pool's Plumbing Lines | PoolSupplies.com
How to Blow Out Your Swimming Pool's Plumbing Lines | PoolSupplies.com
5 Easy Steps on How to Blow Out Pool Lines – Your DIY Guide
5 Easy Steps on How to Blow Out Pool Lines – Your DIY Guide
two metal bars in the snow near each other
two metal bars in the snow near each other

1. **Reduced or No Suction**: A fully functional pool line ensures proper suction of water into the skimmer. If the pool lines are blown out, you'll notice decreased or no suction, causing debris and insects to accumulate on the pool surface.

2. **Air Bubbles**: The pool pump should generate negative pressure to draw water in. If there are air bubbles coming out of the returns, this could indicate positive pressure in the system, a sign of blown-out pool lines.

How to Caulk Your Inground Swimming Pool
How to Caulk Your Inground Swimming Pool
How to Use Inground Pool Caulking
How to Use Inground Pool Caulking

A Simple Dive and Inspection

To verify if your pool lines are indeed blown out, perform a simple underwater inspection:

1. Turn off your pool pump and wait for it to prime (unless it's a variable-speed pump).

AD

2. Dive into the pool and observe the skimmer. If you see water spurting out from the skimmer instead of being sucked in when you place your hand over it, it's likely your pool lines are blown out.

Locating the Damaged Area

The inspection doesn't end at spotting the symptoms. Locating the exact point of damage is critical for a targeted fix:

1. **Mark the Skimmer**: Use a marker to indicate the problematic area on the skimmer. This could be where water sputters or where suction is minimize.

AD

2. **Trace the Line**: Follow the main line leading from the skimmer to the equipment. Mark the same spot on the line as you did on the skimmer. This point likely corresponds to the area where the pool line has blown out, although it could be further down the line.

Repairing Blown-Out Pool Lines

Pool line repair generally involves replacing the damaged section with new PVC piping. Here's a step-by-step guide:

**Equipment Required:** PVC piping, primer, cement, hacksaw, utility knife, pipe cutter, clamps, and sandpaper.

AD

measurement and Cutting the Replacement Pipe

1. **Dismantle the Damaged Area**: Carefully saw through the pool line around the marked area.

2. **Measure the Pipe**: Cut enough pipe to replace the damaged section, plus a few inches on either side. This provides wiggle room during reassembly.

Assembling and Repairing the Pool Line

Before proceeding, ensure your replacement pipe is the same size as the existing one:

1. **Sand and Prime**: Lightly sand the inside and outside of the pipe where you'll apply the cement. Apply PVC primer to both surfaces and allow them to dry.

2. **Glue the Pipe**: Coat both the inside and outside of the fitting with PVC cement. Quickly join the pipe and fitting, holding them together for at least 30 seconds.

Once you've successfully replaced the pool line, refill any water you drained during the repair, resetting your filtration system. Keep an eye on your pool for a while to ensure your fix has resolved the issue. Regular maintenance, like checking water pressure and skimming the pool, can help prevent pool lines from blowing out again in the future.

Finally, always prioritize safety when troubleshooting pool lines. If you're unsure about any aspect of this process, don't hesitate to consult a pool professional.

AD