How to Bleed Rear Brake Lines on a Dirt Bike
Bleeding your rear brakes on a dirt bike is a crucial maintenance task that ensures optimal performance and safety, especially when you're riding off-road. This process, while not particularly complex, requires a systematic approach. Let's take you through the step-by-step process, making sure you feel confident and capable in ending with fully functional brakes.
Before we dive into the actual process, ensure you have the necessary tools and materials. You'll need a box-end wrench that matches your bleeder screw, a grease gun or adjustable bleeder pump, fresh brakefluid, a catch jar with a funnel, gloves, and something to protect your bike's rear wheel, like a .
Preparation and Disassembly
Adequate preparation is essential to keep things tidy and make the process smoother. Begin by positioning your dirt bike on its .
Protect the Rear Wheel
Use a piece of cardboard or a tire bag to protect your rear wheel. This prevents brake fluid from being flung onto the wheel during the bleeding process, which could lead to significant .
Next, remove the rear wheel to gain easier access to the brake components. Loosen the axle bolts, pull the rear wheel off, and set it aside. You can also remove the fender if it's in the way, but this isn't always .
Locate the Brake Bleeder Screw
The bleed screw is typically found at , usually near the bottom of the brake caliper. It's often clearly marked with "B" for bleed or may have a tool size stamped next to it. If you're unsure, consult your dirt bike's .
Brake Fluid Collection and Bleeding Process
Now that you've disassembled the necessary components, it's time to bleed the brakes. This process may seem daunting at first, but it's manageable with a bit of patience and understanding.
Position the Catch Jar
Attach a funnel to a catch jar and position the jar under the bleed screw. Ensure there's enough space for the brake fluid to flow freely without spilling. To prevent contamination, use a separate catch jar for the old brake fluid and a clean one for the new fluid during final filling.
Make sure your grease gun or bleeder pump is filled with fresh brake fluid. Next, lightly grease the bleed screw's threads with a small amount of grease. This will help create a better seal and prevent air from being pulled back into the caliper when you release the pressure.
Bleeding the Brakes: Step-by-Step
Now, let's guide you through actually bleeding the rear brakes: 1. Tighten the bleed screw using your box-end wrench. Ensure it's securely fastened, but don't overtighten and strip the threads. 2. Slowly pump the brake lever to build up pressure in the system. You should feel the lever firming up with each pump. 3. While holding the brake lever in the fully engaged position, loosen the bleed screw half to three-quarters of a turn. This allows the old brake fluid and any air trapped in the system to escape. 4. Repeat steps 2 and 3 until no more air bubbles appear in the brake fluid and it runs clear. Be patient; this could take several pumps and exhaust some brake fluid through the master cylinder. 5. Tighten the bleed screw and release the brake lever slowly to reduce pressure in the system. 6. Repeat the entire process until you've completely bled the rear brakes.