how to bleed harley front brakes

How to Bleed Harley Front Brakes

By Laura Jackson
AD

If you're a Harley enthusiast, you know that regular maintenance is key to keeping your ride in top condition. One crucial task is learning how to bleed Harley front brakes to maintain optimal performance and safety. This process isn't as daunting as it may sound, and with a bit of patience and the right tools, you can conquer this task with ease. Let's dive into the step-by-step process of how to bleed Harley front brakes, ensuring you're well-equipped to handle this essential maintenance procedure.

Before we begin, it's crucial to understand that bleeding your Harley Davidson brakes is necessary to remove air bubbles that may have accumulated in the brake lines over time. These bubbles can cause a spongy feeling when applying the brakes, which can compromise your safety. So, let's get started and ensure your Harley is ready to hit the open road with confidence.

Gathering the Right Tools

Before you begin, it's essential to have the correct tools on hand to make the process smoother and more efficient. Here's a list of tools you'll need:

AD
How to Easily Bleed NON-ABS Dual Disc Brakes Harley Davidson Touring, Softail, Dyna, Sportster
How to Easily Bleed NON-ABS Dual Disc Brakes Harley Davidson Touring, Softail, Dyna, Sportster
a close up of the front wheel of a motorcycle with spokes and brake pads
a close up of the front wheel of a motorcycle with spokes and brake pads
How to Bleed Brake Lines on a Harley Without ABS
How to Bleed Brake Lines on a Harley Without ABS
  • Caliper bleeder tool (specific to your Harley Davidson model)
  • otsf (/Open metric) socket wrench (for removing the caliper)
  • C overflow bottle (for collecting old brake fluid)
  • Fresh brake fluid (DOT 3 or 4, depending on your Harley Davidson model)
  • Clear tubing (approximately 10-12 inches in length)
  • Two syringes (50cc and 60cc)
  • Vise-grip pliers (for holding the banjo bolt)
  • Shop towels or rags (for cleaning up spills)

Having these tools readily available will make the bleeding process much more manageable. Now that we have everything we need let's move on to removing the caliper for an in-depth look at the bleeding procedure.

Removing the Caliper and Preparing for Bleeding

Before you can bleed your Harley Davidson's front brakes, you'll need to remove the caliper. This step-by-step guide will walk you through the process:

How to Bleed & Flush Harley-Davidson Brake System Fluid-ABS & Non-ABS Systems
How to Bleed & Flush Harley-Davidson Brake System Fluid-ABS & Non-ABS Systems
Are Motorcycle Brakes as Easy To Bleed as Car Brakes?
Are Motorcycle Brakes as Easy To Bleed as Car Brakes?

Removing the Caliper Mounting Bolt

Using your ottf (or open metric) socket wrench, loosen and remove the caliper mounting bolt. Be sure to use the appropriate socket size for your Harley Davidson model. Once removed, carefully lift the caliper off the disc.

Supporting the Caliper

With the caliper now loose, carefully support it to prevent any strain on the brake line. You can do this by placing a piece of wire or a small block of wood between the steering knuckle and the caliper. This step ensures that the brake line isn't put under unnecessary stress, as it could potentially cause tears or ruptures.

AD

The next step involves preparing the system for bleeding. Let's dive into the specifics of how to bleed Harley front brakes for optimal performance.

Preparing the System for Bleeding

Now that the caliper is removed and supported, it's time to prepare the system for the bleeding process. Follow these steps to ensure you're ready to remove air from the brake lines:

Attaching the Clear Tubing

Insert one end of the clear tubing into the bleeder valve on the caliper. Make sure the tubing is a tight fit to prevent air from entering the line during the bleeding process. The other end of the tubing should be submerged in fresh brake fluid inside the overflow bottle. This setup allows any air in the system to be pushed out and replaced by fresh brake fluid.

AD

Filling the Master Cylinder

Remove the cap from the master cylinder and fill it with fresh brake fluid. Be careful not to overfill, as this can cause unnecessary mess and potential damage to the brake system. The fluid level should be just below the rim of the master cylinder. Once filled, reinstall the cap.

With the system prepared, it's time to learn how to bleed Harley front brakes effectively, ensuring optimal performance and safety on the road.

Bleeding the Front Brake System

Now that you've prepared the system and gathered all the necessary tools, it's time to bleed your Harley Davidson's front brakes. This step-by-step guide will walk you through the process, ensuring optimal results:

AD

Bleeding the Outboard Line

Begin the bleeding process by attaching one of the syringes (60cc) to the Schrader valve on the forward side of the brake line. Slowly pump fresh brake fluid into the line using the syringe. As you pump, have a helper or use the caliper bleeder tool (if available) to open the bleeder valve on the caliper. This process forces any air in the line out through the clear tubing and into the overflow bottle.

Bleeding the Inboard Line

Once you've bled the outboard line, switch your focus to the inboard line. This process is identical to the outboard line, but you'll use the smaller syringe (50cc) this time. Again, have a helper or use the caliper bleeder tool to open the bleeder valve while pumping fresh brake fluid into the line with the syringe.

Repeat this process for both the inboard and outboard lines, working in tandem with your partner or using a caliper bleeder tool to ensure all air is removed from the system. Continue until there are no more air bubbles present in the clear tubing, and fresh brake fluid is consistently expelled from the line.

Checking the Master Cylinder

After bleeding both lines, check the master cylinder to ensure it's topped off with fresh brake fluid. If necessary, add more brake fluid to maintain the optimal level. Reinstall the cap, being careful not to overfill the reservoir.

With the front brake system successfully bled, it's time to reassemble the caliper and put the finishing touches on your maintenance project.

Reassembling the Caliper and Final Touches

Now that you've successfully bled your Harley Davidson's front brakes, it's time to reinstall the caliper and ensure everything is functioning properly:

Reinstalling the Caliper

Position the caliper back onto the disc, and reinsert the mounting bolt. Tighten the bolt using your ottf (or open metric) socket wrench, ensuring it's securely fastened but not overtightened. The recommended torque for the mounting bolt is typically between 20-30 foot-pounds of pressure, depending on your Harley Davidson model.

Checking Brake Fluid Level

After reinstalling the caliper, check the brake fluid level in the master cylinder once more. Add brake fluid as needed to maintain the proper level, ensuring there are no signs of air bubbles in the system.

Congratulations! You've successfully learned how to bleed Harley front brakes and completed this essential maintenance task. By following these step-by-step instructions, you've ensured your Harley Davidson's brake system is functioning at its best, providing you with confidence and safety on every ride.

Regularly maintaining your Harley Davidson is crucial for keeping it in top condition and preserving its resale value. Consider adding brake bleeding to your routine maintenance schedule to ensure your bike remains in optimal shape for years to come. Happy riding, and always prioritize safety on the open road!

AD