how to bleed avid elixir 3 brakes

Step-by-Step: How to Bleed Avid Elixir 3 Brakes

By James Davis
AD

Bleeding your Avid Elixir 3 disc brakes is a crucial maintenance task that ensures peak performance and longevity. This process involves removing air from the system and adding mineral oil to re-establish the hydraulic pressure. Here's a comprehensive, step-by-step guide to help you master this task.

Before you begin, gather your tools: a 4mm hex wrench, syringes with male fittings and pressure bulbs, Avid Elixir DOT 5.1 brake fluid, and rags or shop towels. Also, ensure that your bike is on a stand, and the wheel is easily accessible.

Preparation and Disassembly

Start by removing the wheel to make working on the brakes easier. Locate the master cylinder reservoir on the brake lever. Carefully unscrew the cap using your 4mm hex wrench and set it aside.

AD
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR

Next, identify the brake caliper. Look for the banjo bolt that connects the brake hose to the caliper. Unscrew this bolt using your 4mm hex wrench. Be careful not to lose the washers that come with it.

Bleeding the System

Before you proceed, make sure the syringes you're using are compatible with mineral oil. Avid Elixir brakes use DOT 5.1 fluid, which is not compatible with traditional hydraulic brake oils. Now, follow these steps to bleed your brakes:

My homemade Avid bleed kit
My homemade Avid bleed kit
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR
How to bleed Avid or SRAM brakes with Bleeding Edge - MBR

1. **Priming the System**: Wipe away any residual brake fluid around the bleeder valve. Attach your syringe to the valve, ensuring a tight seal. Pump the brake lever several times to help prime the system and force any air towards the caliper.

2. **Positioning the Syringe**: Carefully move the syringe to the caliper. Be prepared to catch any drips with a rag or shop towel. Open the bleeder valve by turning it counterclockwise with your hex wrench. Slowly pull the plunger of the syringe out to create a vacuum and draw brake fluid into the syringe. Close the valve after a few mm of fluid has been siphoned.

AD

3. **Repeating the Process**: Repeat the above steps until there are no signs of air in the system and the lever feels firm and responsive. It's essential to perform this process on both brake lines, working from the caliper back to the lever to ensure all air is purged.

Reassembling and Final Checks

Once you've bled both lines and the lever feels solid, it's time to reassemble the brakes:

1. **Reinstalling the Banjo Bolt**: With the bleed process complete, wipe away any residue and reinstall the banjo bolt. Ensure the washers are correctly positioned and securely tighten the bolt.

AD

2. **Refilling the Reservoir**: Top off the master cylinder reservoir with DOT 5.1 fluid. Wipe away any spills and replace the reservoir cap.

3. **Checking the Lever**: Squeeze the brake lever to check that it feels firm and responsive. There should be no sponginess or excessive play in the lever. If necessary, repeat the bleeding process to achieve the desired feel.

4. **Reinstalling the Wheel**: Once satisfied with the lever's performance, reattach the wheel and give it a couple of spins. Listen for any drag or resistance, which could indicate that something is still not right and needs further attention.

AD

Post-Bleeding Care

A proper post-bleeding procedure can enhance the longevity of your brakes and protect your bicycle's finish. Here's how to care for your Avid Elixir brakes post-bleeding:

**Washing and Inspection**: After bleeding your brakes, wipe down the brake pads, caliper, and rotor with a damp cloth to remove any brake fluid residue. Inspect the pads and rotor for signs of wear. If worn, replace the pads and true or replace the rotor as needed.

Monitoring Your Brakes

Regularly check your brakes after riding. Squeeze the levers to assess their firmness, and look for signs of leakage or contamination around the caliper and pads. If you notice anything out of the ordinary, address it promptly to prevent larger issues from developing.

**Storing Your Bike**: When not in use, apply a light layer of bicycle-specific oil to the brake pads to prevent corrosion and keep them in good working order. Also, periodically move the pads to ensure they are correctly centered on the rotor to promote even wearing and further prolong the life of your brakes.

Congratulations, you've successfully bled your Avid Elixir 3 brakes! Regular maintenance like this will help maintain your bike's performance and safety while extending the life of your brakes. Happy riding!

AD