how to backwash de pool filter

Easy Steps: How to Backwash Your Pool Filter

By Sarah Jackson
AD

Regular pool maintenance is crucial to keep your pool water sparkling clean and fresh, with one of the key tasks being the periodic backwashing of your pool filter. This process cleans out the filter, removing dirt and debris that have accumulated, ensuring the longevity and efficiency of your filtration system. So, how exactly do you backwash a pool filter? Let's dive into a step-by-step guide.

Before we start, remember that backwashing should be part of your regular pool maintenance routine, typically done once every 6 to 8 weeks, or when the pressure gauge indicates a significant increase in pressure. Now, let's get down to it.

Preparing Your Pool Filter for Backwashing

Before you begin, make sure your pool pump is off. Safety first, especially when dealing with electrical equipment. Next, check the type of filter you have - sand, cartridge, or diatomaceous earth (DE) - as the backwash procedure varies slightly depending on the filter type.

AD
How to Backwash a Pool Filter (The Right Way)
How to Backwash a Pool Filter (The Right Way)
How to Backwash a Pool Filter
How to Backwash a Pool Filter
How Do You Backwash A Pool Filter?
How Do You Backwash A Pool Filter?

For this guide, we'll focus on sand and cartridge filters, as they are the most common. If you have a DE filter, consider looking up a separate guide, as the process involves more steps and special considerations.

Sand Filters

1. Isolate the Filter: Turn the multiport valve to the 'Isolate' or 'Sequential' position to isolate the filter from the pool plumbing.

How Do I Backwash a Sand Filter in My Fiberglass Pool? - Thursday Pools
How Do I Backwash a Sand Filter in My Fiberglass Pool? - Thursday Pools
How to Backwash a Pool Filter (The Right Way)
How to Backwash a Pool Filter (The Right Way)

2. Release Pressure: Move the multiport valve to the 'Waste' or 'Backwash' position. This will release the pressure in the filter.

Cartridge Filters

1. Locate the Air Relief Valve: The air relief valve, usually located at the top of the filter tank, helps to release any air that has accumulated.

AD

2. Open the Valve: Open the air relief valve, which should cause a loud hissing sound. This indicates that air is being released. Be sure to have your face and body turned away, as water may come out at high pressure.

With your filter ready, it's time to start the backwashing process.

Backwashing Your Pool Filter

The backwashing process is straightforward and involves reversing the water flow through the filter, flushing out dirt and debris. Let's see how it's done.

AD

Remember, the backwash process will send debris into your pool's waste line, so ensure your plumbing is capable of handling it.

Sand Filters

1. Backwash: Turn the multiport valve to the 'Backwash' position. Most pool pumps are strong enough to push water backwards through the filter, so you don't need to reverse the pump's direction.

2. Watch the Pressure Gauge: During backwashing, you should see the pressure on the gauge drop. If you don't, it could indicate that your filter is broken or the backwashing process isn't working properly.

AD

Cartridge Filters

1. Backwash: Turn the multiport valve to the 'Backwash' position, similar to sand filters.

2. Inspect the Cartridge: After backwashing, you'll need to remove the cartridge (usually by lifting it out from the top of the filter tank) and inspect it. Look for signs of tears or excessive dirt build-up, which may indicate it's time for a replacement.

Now that your filter is clean, it's time to rinse and reset it.

Rinsing and Resetting Your Pool Filter

Rinsing your filter after backwashing helps to ensure that all dirt and debris are removed and that the sand or cartridge is rinsed clear of any remaining debris.

Again, the process varies slightly depending on your filter type:

Sand Filters

1. Rinse: Turn the multiport valve to the 'Rinse' position. This pushes water through the filter in the normal direction, helping to dislodge any remaining dirt.

2. Recirculate: After rinsing, turn the multiport valve to the 'Recirculate' or 'Filter' position. This returns your pool to normal filtration.

Cartridge Filters

1. Clean the Cartridge: If necessary, clean your cartridge. Some cartridge filters have clean-in-place systems, while others require you to remove the cartridge to clean it. Always follow the manufacturer's instructions for care and cleaning of your specific cartridge type.

2. Reinstall and Resume Normal Filtration: Once your cartridge is clean, reinstall it into the filter tank and turn the multiport valve back to the 'Filter' position to resume normal filtration.

Congratulations! You've successfully backwashed your pool filter. Regular backwashing will not only improve the quality of your pool water but also extend the lifespan of your filter. Always remember to keep your equipment well-maintained, and enjoy your crystal-clear pool.

But wait, don't forget about the area around your pool. Surrounding surfaces can harbor dirt, bacteria, and algae, so consider using a surface cleaner to keep everything sparkling. After all, a clean pool deserves a clean patio!

AD