How to Backwash Intex Pool Filter: Step-by-Step Guide
Backwashing, an essential maintenance task for Intex pool filters, helps remove trapped dirt and debris, ensuring your pool's filtering system functions efficiently. This guide will walk you through the process in simple, step-by-step instructions.
Regular backwashing increases the lifespan of your pool filter and provides a cleaner, safer swimming environment. Let's dive into the process and make it easy for you to maintain your Intex pool's filter.
Understanding Your Intex Pool Filter
Before we start, it's crucial to understand your filter type. Intex pools often come with sand, cartridge, or D.E. (diatomaceous earth) filters. This guide focuses on sand and cartridge filters, as they are the most common.
Sand and cartridge filters require different backwashing techniques, so ensure you follow the instructions corresponding to your filter type.
Prepare Your Intex Pool for Backwashing
Before you begin backwashing, prepare your pool and ensure all safety measures are in place.
Safety First
Turn off your pool pump to prevent any accident while backwashing. Ensure children and pets are away from the pool area to avoid injuries.
Gather Your Equipment
You'll need the following items for backwashing:
- Swimming pool backwash hose
- Pool filter valve lubricant (for sand filters)
- Replacement sand (if necessary)
Backwashing an Intex Sand Pool Filter
Sand filters require backwashing when the pressure on the filter gauge rises by 8-10 psi above its baseline. Here's how to backwash an Intex sand filter:
Step 1: Set the Filter Valve to Backwash
Turn the multi-port valve counterclockwise to the 'Backwash' position.
Step 2: Attach the Hose and Start the Pump
Connect one end of the backwash hose to the filter's waste port and the other to a nearby drain or trough. Turn on the pool pump. The water will flow backward through the filter, dislodging and removing dirt and debris.
Step 3: Rinse the Filter
Once the discharge water seems clear, turn the valve immediately to the 'Rinse' position. Run the pump for 15-30 seconds to remove any remaining sand from the system.
Backwashing an Intex Cartridge Pool Filter
Cartridge filters require backwashing when the pressure gauge shows a consistent 8-10 psi increase above the baseline. Here's how to backwash an Intex cartridge filter:
Step 1: Turn Off the Pool Pump and Remove the Cartridge
Shut off the pump and unscrew the cartridge element, lifting it out of the filter tank.
Step 2: Rinse the Filter Cartridge
Rinse the cartridge thoroughly with a garden hose. If your cartridge has a central core, spray water into both ends and completely through the core to remove all debris. Allow the cartridge to air dry before replacing it.
Inspect and Maintain Your Filter
After backwashing, inspect your filter for any leaks or damage. If your sand filter has lost sand during backwashing, add clean filter sand to bring the level back up to the top of the laterals.
Lubricate the Filter Valve O-Rings
Apply pool filter valve lubricant to the O-rings to ensure they remain in good working condition and prevent leaks.
Sit Back and Enjoy Your Clean Pool
Regular backwashing is a vital aspect of maintaining a clean, safe, and enjoyable swimming environment. Make backwashing a part of your regular pool maintenance schedule and enjoy your Intex pool stress-free!
Remember, every pool and filter are unique, so always consult your specific Intex pool manual for additional guidance. Happy swimming!