how to backwash a de filter pool

Mastering Pool Maintenance: How to Backwash a DE Filter Pool

By Michael Smith
AD

When it comes to maintaining a sparkling and healthy pool, regular cleaning and maintenance are essential. One crucial aspect of this is knowing how to backwash a DE filter pool. DE filters, or diatomaceous earth filters, are popular for their ability to maintain crystal-clear water, but they require a specific maintenance process to keep functioning optimally. In this comprehensive guide, we'll walk you through the step-by-step process of how to backwash a DE filter pool, ensuring your pool water stays clean and inviting.

Before we dive into the process, let's briefly understand what backwashing is. Backwashing is a process where clean water is reversed through the DE filter, lifting the filter media and helping to dislodge and remove any trapped dirt. This reverses the flow of water, hence the term 'backwash.' It's a critical part of maintaining DE filters, ensuring their longevity and performance.

Preparing Your Pool for Backwashing

Before you start, there are a few preliminary steps to ensure a smooth backwashing process.

AD
an image of a poster with the words how to backwash a de filter
an image of a poster with the words how to backwash a de filter
How to Backwash a Pool Filter
How to Backwash a Pool Filter
How Do You Backwash A Pool Filter?
How Do You Backwash A Pool Filter?

First, you need to check the pressure gauge on your pool filter. DE filters typically require backwashing when the pressure exceeds 8-10 psi over the starting pressure. This usually happens about every six weeks, but this can vary depending on your pool's usage and size.

Equipping Yourself for the Task

Gather the necessary tools before you begin. You'll need:

How Do I Backwash a Sand Filter in My Fiberglass Pool? - Thursday Pools
How Do I Backwash a Sand Filter in My Fiberglass Pool? - Thursday Pools
How to Backwash a Pool Filter (The Right Way)
How to Backwash a Pool Filter (The Right Way)
  • Swim fins and a mask to keep your face and eyes safe from debris and chemicals.
  • A sand funnel to replace the DE powder after backwashing.
  • Diatomaceous earth (DE) powder to refill the filter.
  • Pool filter cleaner to clean the filter grids.

Shutting Down the Pool System

Before you backwash, ensure your pool system is off. This includes:

  1. Shutting off the pool pump.
  2. Closing the multiport valve to the filter
  3. Turning off the pool timer or system automation if you have one.

The Backwashing Process

Now that you're prepared, let's dive into the actual backwashing process.

AD

Start by turning the multiport valve to the 'backwash' position. This reverses the water flow through the filter, pushing water out of the waste line.

Backwashing the Filter

Turn on the pool pump for a few seconds to start the backwash process. You should see opaque water coming out of the waste pipe. Run the pump briefly, until the water from the waste pipe becomes clear. This indicates that the DE has been lifted off the filter elements and is being washed away.

Once the water is clear, turn off the pump and move the multiport valve to 'rinse.' This step helps to remove any remaining DE from the filter. Run the pump again briefly, then turn it off once the waste water runs clear.

AD

Refilling the Filter with DE

After rinsing, it's time to refill the filter with fresh DE powder. This is where the sand funnel comes in handy. Add about 2-3 pounds of DE into the sand funnel, then pour it into the skimmer while the pump is running at the 'rinse' position. This helps to distribute the DE evenly throughout the filter.

Once you've added the DE, move the multiport valve to the 'filter' position and run the pump for about 5-10 minutes to ensure the DE has settled over the filter elements.

Cleaning and Maintaining the Filter

Cleaning the filter grids is an important step in maintaining your DE filter's performance. This should be done every few months or so, depending on your pool's usage.

AD

Removing and Cleaning the Filter Grids

Remove the lid of the filter canister and use the air relief valve to release any trapped air. Then, remove the filter grids and clean them thoroughly using a filter cleaner. Rinse them with water and let them air dry before replacing them.

Reassembling the Filter

Once the grids are clean and dry, replace them in the filter canister. Make sure the gasket is in place and the lid is properly sealed. Then, re-prime the pool pump and restart the pool system.

Regularly backwashing and cleaning your DE filter is key to maintaining a healthy pool. It's recommended to backwash every six weeks or when the pressure gauge reads 8-10 psi above your starting pressure. Remember, prevention is always better than cure, so stay on top of your pool maintenance to avoid costly repairs in the future.

AD