how to adjust the governor on a briggs & stratton

Step-by-Step: Adjust Your Briggs & Stratton Governor

By Joshua Smith
AD

If you're the proud owner of a Briggs & Stratton engine and you're experiencing power issues, it might be time to adjust your governor. The governor controls the engine's speed by regulating the fuel supply, ensuring your machine runs smoothly and safely. Here's a comprehensive guide on how to adjust your Briggs & Stratton governor, ensuring optimal performance and longevity for your engine.

Before we dive into the process, it's crucial to understand that adjusting the governor is a delicate task. It requires patience, precision, and a good understanding of your engine's intricacies. If you're unsure about any step, it's always best to consult a professional or your engine's manual.

Understanding Your Briggs & Stratton Governor

Briggs & Stratton engines use a mechanical governor, which consists of a governor arm, a spring, and a governor link. The governor arm is connected to the engine's crankshaft and oscillates with engine speed. The spring and governor link work together to keep the engine speed within a specific range, regardless of load changes.

AD
Governor Adjustment and How They Work Honda Briggs Tecumseh Kohler etc.
Governor Adjustment and How They Work Honda Briggs Tecumseh Kohler etc.
How To Adjust A Briggs & Stratton Governor - Hunker
How To Adjust A Briggs & Stratton Governor - Hunker
Briggs and Stratton Old Style Mechanical Governor Adjustment Setup
Briggs and Stratton Old Style Mechanical Governor Adjustment Setup

The governor's adjustment screws are typically located on the governor housing. One screw controls the maximum engine speed (hi-speed), while the other controls the minimum engine speed (lo-speed). By adjusting these screws, you can fine-tune your engine's performance.

Preparation: Tools and Safety Measures

Before you start, gather your tools: a small flathead screwdriver, a ratchet with a 7/16" socket, an oil filter wrench, and a suitable fuel stabilizer. Also, make sure to wear safety glasses and gloves to protect yourself during the procedure.

Briggs and Stratton Intek V-Twin Governor Issue: Engine Revs Uncontrollably / No Idle - SOLVED!
Briggs and Stratton Intek V-Twin Governor Issue: Engine Revs Uncontrollably / No Idle - SOLVED!
Briggs and Stratton 5HP - Governor Adjustment - Model 135202
Briggs and Stratton 5HP - Governor Adjustment - Model 135202

First, ensure your engine is cool to prevent any burns. Next, disconnect the spark plug wire to prevent the engine from starting during the adjustment process. Remember to work in a well-ventilated area to avoid fuel fumes.

Adjusting the Hi-Speed Screw

The hi-speed screw controls your engine's full-throttle speed. To access it, remove the engine's air cleaner housing and any surrounding covers. Use your flathead screwdriver to adjust the hi-speed screw. Clockwise turns increase the engine speed, while counterclockwise turns decrease it.

AD

Start by turning the hi-speed screw all the way in (clockwise) until it's snug, then back it out five full turns. This provides a starting point for fine-tuning. Reattach the air cleaner housing and other covers.

Setting the Lo-Speed Screw

The lo-speed screw regulates your engine's idle speed. Access it in the same way you did the hi-speed screw. Adjusting this screw requires a bit more finesse. Turning it clockwise slightly increases the idle speed, while counterclockwise decreases it.

To set the lo-speed screw, start with the engine off and the throttle closed. Turn the screw clockwise until it's snug, then back it out one full turn. This should provide a reasonable idle speed for most applications.

AD

Testing and Fine-Tuning Your Governor Adjustments

After making your initial adjustments, it's time to test your engine. Reconnect the spark plug wire and start the engine. Let it warm up for a few minutes, then rev the engine gently to check its full-throttle speed.

If the engine speed is too high or too low, fine-tune the hi-speed screw in small increments (half-turns at most) until you achieve the desired full-throttle speed. For idle speed, fine-tune the lo-speed screw in even smaller increments until you reach your desired rpm (typically around 1000-1200 rpm for most outdoor power equipment).

Lubricating Your Governor Link

To ensure optimal performance and longevity from your governor, it's crucial to keep the governor link lubricated. Regularly inspect the governor link for signs of wear or excessive play. If you notice any issues, replace the link immediately.

AD

To lubricate the governor link, apply a small amount of engine oil to the pivot point where the link meets the governor arm. Also, lubricate the governor adjustment screws to prevent seizing. After lubricating, wipe away any excess oil to prevent it from attracting dirt or debris.

Regularly adjusting and maintaining your Briggs & Stratton governor ensures your engine runs smoothly, efficiently, and safely. Don't forget to refer to your engine's manual for specific instructions, as slight variations may apply. Keep your outdoor power equipment in top shape, and enjoy the confidence that comes with knowing you've got a well-tuned machine ready for whatever task comes your way.

AD