go power lawn mower how to start

Go Power Lawn Mower: Step-by-Step Guide to Start Without Hassle

By John Anderson
AD

Starting a GO Power lawn mower isn't much different from starting any other push mower. Follow these simple steps to have your lawn looking tidy in no time. Let's dive right in.

Before you start, ensure you've read the operator's manual and executed any necessary safety precautions. Now, let's get that mower rolling!

Preparing Your GO Power Lawn Mower

Before you start the engine, you want to make sure your GO Power lawn mower is ready to roll. Here's what to check:

AD
Easy Tips to Start a Lawn Mower with Old Gas
Easy Tips to Start a Lawn Mower with Old Gas
a lawn mower with the words how to clean lawn mower carburetor without removing it
a lawn mower with the words how to clean lawn mower carburetor without removing it
How to Start a Craftsman Lawn Mower – Follow 6 Easy Steps
How to Start a Craftsman Lawn Mower – Follow 6 Easy Steps

First, ensure the safety bar is engaged and the lever is in the 'stop' position. Check the condition of the grass catcher, and make sure the mower is on a flat surface for ease of starting.

Checking the Fuel

The fuel tank should be filled with fresh unleaded gasoline with a minimum octane rating of 87. Avoid using gas with more than 10% ethanol or gasoline older than 30 days to prevent engine issues.

lawn mower won't start?
lawn mower won't start?
TRY THIS TRICK to get your lawnmower started after sitting! Briggs Troybilt spring start up guide
TRY THIS TRICK to get your lawnmower started after sitting! Briggs Troybilt spring start up guide

Remember to turn off the fuel valve when not in use to prevent fuel from lesióning the engine. Always keep your mower and fuel out of reach of children and pets.

Inspecting the Spark Plug

The spark plug ignites the fuel in your mower's engine. If it's fouled or damaged, your mower may not start. Check it periodically and replace it if necessary.

AD

Remove the spark plug wire and use a spark plug socket to turn the plug counterclockwise until it's loose, then unscrew it by hand. Inspect the electrode gap and replace it if it's fouled, damaged, or the gap is incorrect.

Starting Your GO Power Lawn Mower

Now that your mower is prepped, it's time to start it. Follow these steps for a smooth start:

Place the mower on a flat surface, engage the parking brake, and ensure the choke lever is in the 'closed' position. This provides the rich fuel mixture your cold engine needs.

AD

Pulling the Start Cord

Hold the mower handle with one hand and grasp the start cord with the other. Give it a sharp tug, for about two seconds, and release. Do this consistently and you should see the engine turn over.

If the engine doesn't start after several attempts, wait a few minutes to allow the cord to cool. If it still doesn't start, move on to the next steps to troubleshoot the issue.

Adjusting the Choke

If your engine doesn't start after a few attempts, you may need to adjust the choke. Once the engine has warmed up slightly, move the choke lever to the 'open' position. This provides a leaner fuel mixture for warm operation.

AD

Keep in mind that running your mower with the choke on 'closed' in warm conditions can cause the engine to overheat and flood with fuel. Always adjust the choke for optimal performance.

With these steps and a little practice, you'll be starting your GO Power lawn mower like a pro. Happy mowing!

AD