how to fix pull start on lawn mower

Fix Pull Start on Lawn Mower: Step-by-Step Guide

By Kevin Jackson
AD

Is your once-reliable lawn mower now leaving you with a floppy pull cord and a machine that won't start? The culprit could be a malfunctioning pull start mechanism. Don't lose heart; you can fix it with a bit of tinkering and some basic troubleshooting. Here's a comprehensive guide on how to fix a pull start on your lawn mower.

First, let's understand what can go wrong with the pull start mechanism. This crucial component consists of a pull cord attached to a centrifugal clutch. When you pull the cord, it engages the engine's flywheel, starting the engine. Common issues include frayed or broken cords, worn-out clutch parts, or a binding engine.

Inspecting the Pull Cord and Handle

Begin by checking the pull cord and handle for any signs of damage or wear. If the cord is frayed oreba href="https://www.seobloggear.com/unrecognized-word-eba.html">rea broken, replace it immediately to prevent injuries.

AD
How to Start a Lawn Mower with a Broken Pull Cord: Quick Fix Tips
How to Start a Lawn Mower with a Broken Pull Cord: Quick Fix Tips
How to Fix a Pull Start That Won’t Retract (+ Why It Happens)
How to Fix a Pull Start That Won’t Retract (+ Why It Happens)
Fix a Hard to Pull Start Cord by Adjusting Valves - Briggs & Stratton 550EX Lawnmower Engine
Fix a Hard to Pull Start Cord by Adjusting Valves - Briggs & Stratton 550EX Lawnmower Engine

The handle should also be in good condition. If it's cracked or wobbles, it's time for a replacement. Safety first: always disconnect the spark plug before replacing the pull cord or handle to prevent unexpected starts.

Replacing the Pull Cord

Once you've identified that the pull cord is the issue,replace it with a new one. You can find replacement cords at a hardware store or order one online. Ensure you get the correct type and length for your mower.

How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
How to Jump a Starter on a Lawn Mower: A Step-by-Step Guide
How to Jump a Starter on a Lawn Mower: A Step-by-Step Guide

To replace the cord, follow these steps:

  1. Disconnect the pull cord from the clutch by unscrewing and removing the handle.
  2. Feed the new cord through the handle and clutch mechanism.
  3. Reattach the handle and pull the cord slowly to engage the clutch.
  4. Adjust the cord length by tying a knot or using a cord lock mechanism.

AD

Dealing with a Worn-out Clutch

If the cord is fine but the mower still won't start, the centrifugal clutch might be worn out. Inspect the clutch for any cracks, leaks, or damage. If it's extensively damaged, replace it with a new one.

To replace the clutch:

  1. Disconnect the spark plug and remove the air filter and carburetor to expose the clutch.
  2. Unscrew and remove the old clutch, then clean any residual debris from the area.
  3. Install the new clutch and reattach the carburetor, air filter, and spark plug.

AD

Investigating Engine Issues

If the pull start and clutch are in good condition, the problem might lie with the engine. A common issue is a binding engine, which happens when the engine's moving parts seize up due to lack of use or old oil.

The first step is to check the engine oil. If it's old or contaminated, drain and replace it with fresh oil. If the engine is still binding after an oil change, the issue might be more serious. In this case, consult a professional mechanic to avoid causing further damage.

Cleaning the Engine

A dirty engine can also cause starting issues. Use a brush and compressed air to clean the engine, paying particular attention to the crankshaft, flywheel, and carburetor. Be sure to wear safety glasses during this process.

AD

If cleaning doesn't solve the problem, check for any debris or damage to the engine's internal parts. If you find any issues, they might require professional repair or replacement.

Adjusting the Carburetor

A poorly adjusted carburetor can cause starting difficulties. If you're comfortable with engine tuning, you can adjust the carburetor yourself. Otherwise, it's best to leave this task to a professional.

To adjust the carburetor:

  • Locate the high-speed and low-speed screws on the carburetor.
  • Turn the high-speed screw clockwise until it's snug, then back it out one and a half turns.
  • Do the same for the low-speed screw.
  • Start the engine and let it warm up, then fine-tune the screws for optimal performance.

Remember, trial and error is part of the process when tuning a carburetor. Be patient and don't rush the tuning process. Regularly check your lawn mower's maintenance schedule and address any issues promptly to maintain its performance and longevity.

The satisfaction of fixing your lawn mower and getting back to those chores or gardening projects is well worth the effort. So, grab your tools, consult this guide, and get started on your lawn mower repair today. Happy fixing!

AD