Learn To Make A Cozy Chunky Blanket: Your Step-By-Step YouTube Guide
Snuggling up with a cozy chunky blanket is an undeniable pleasure, and creating one yourself can be an incredibly satisfying DIY project. In this comprehensive guide, we'll walk you through the process of making a chunky blanket, step by step, so you can enjoy Crafting 101 at its finest.
Before we dive into the nitty-gritty, let's talk about why you might want to make a chunky blanket. Not only is it a fabulous way to upcycle your old clothes or bedding, but it's also an eco-friendly project that reduces textile waste. Plus, there's just something incredibly cozy about wrapping yourself in a blanket you made with your own hands. So, let's get started!
Gathering Your Materials
The first step in making a chunky blanket is gathering your materials. For this project, you'll need:
- An old duvet or two worn-out bed sheets
- Two or more old sweaters or a yard of thick, soft fabric (like Sherpa or fleece)
- Scissors or a rotary cutter and a cutting mat
- Darning needle (size 16 or larger)
- Two tension clips (optional, for hanging your blanket while working)
Once you've gathered your materials, it's time to prep your fabric. For the duvet or bed sheets, you'll want to cut them open and lay them flat, right sides facing up. If you're using sweaters, you'll need to cut them open along the seams and lay them flat as well.
Cutting Your Fabric
Now comes the fun part – cutting your fabric into strips! For a chunky blanket, you'll want your strips to be nice and wide. A good size is 6-8 inches wide. You can make them as long as you like, but 30-34 inches is a good starting point.
To maximize your fabric, you can cut your strips on a bias, but this isn't necessary. Once you've cut all your strips, set them aside. You're almost ready to start tying!
Starting the Tying Process
To start, decide which two strips you want to tie together first. Lay them right sides facing up, with the top of one strip aligned with the middle of the other. If you're using a duvet or bed sheet, tuck the edges of the strip under so they're hidden.
Now, place the darning needle through the middle of the top strip and pull it through to the back. Then, pull it up through the middle of the bottom strip. This should create a knot. Pull the needle and its string through the loop to secure the knot. This is a half hitch knot, and it's the basis for tying your chunky blanket.
Tying the Strips Together
Next, you're going to create a series of these half hitch knots. Once you've made one, pinch the two strips together below the knot. Then, placing the darning needle through the bottom of the top strip and then up through the bottom strip again, pull the string through to create another half hitch knot.
Continue this process, working your way down the strips. Try to keep your knots about an inch apart, and be sure to pull each one tight. This will create a lovely, chunky texture on the front of your blanket.
The key to making a chunky blanket is to not worry about making it perfect. The wonky, uneven joins add to the charm of this type of blanket, so don't stress too much about keeping everything even.
Adding More Strips
Once you've tied one strip to another, it's time to add more. Lay another strip along the right side of the strip you're working on, and tie it in the same way, starting with the half hitch knot in the middle.
Continue adding strips until you've reached the desired width for your blanket. Be sure to leave a few inches at the top and bottom for fringe if you want to add some!
Now that you've finished tying your blanket, it's time to create some fringe. Cut each of the loose ends of your strips into fringes, leaving a few inches at the top to prevent unraveling. You can trim them to be even or leave them as they are – it's up to you!