swingline stapler how to open flat

Swingline Stapler Opening Trick: How to Open Flat

By Joseph Moore
AD

If you're a craft or office supplies enthusiast, chances are you own a Swingline stapler. Known for their durability and reliable performance, Swingline products are a favorite among users. But sometimes, even the most robust staplers need a little TLC, like opening them flat for cleaning or repairs. Here's a step-by-step guide on how to open your Swingline stapler flat, ensuring you maintain its longevity and functionality.

Before we dive into the details, remember that opening your stapler allows you to clean and maintain it, but it also poses the risk of damaging it if not done carefully. Always follow these instructions closely to ensure you keep your Swingline stapler in top condition.

Preparation: Gather Your Tools

Before you start, gather these tools to make the process smoother: a Phillips or flathead screwdriver (depending on your stapler's model), tweezers, and a small brush for cleaning. Having these tools at hand will simplify the process and prevent any frustration.

AD
How to Unjam a Stapler
How to Unjam a Stapler
How To Put Staples in a Heavy Duty Blackspur Stapler
How To Put Staples in a Heavy Duty Blackspur Stapler
Stapler Works Again
Stapler Works Again

Once you have your tools ready, find a well-lit, flat surface to work on. A table or desk will do just fine. Now, let's get started!

Understanding Your Swingline Stapler

First, familiarize yourself with your Swingline stapler. Most models from this brand have a simple design, with visible screws on the sides or underside. Typically, there are two screws - one on each side of the stapler. Your task is to remove these screws to open the stapler flat.

How to Load Paper Pro Stapler | Describe in 4 Quick Steps (2026)
How to Load Paper Pro Stapler | Describe in 4 Quick Steps (2026)

If your stapler doesn't have visible screws, it might be secured with small hoops or latches instead. In this case, you'll need a different approach to open it, which we'll discuss later in this guide.

Removing the Screws: A Step-by-Step Guide

Now that you're familiar with your stapler's design, it's time to remove the screws. Start by turning the stapler upside down, so the screws are visible. Using your screwdriver, carefully turn the screw counterclockwise until it comes out completely. Repeat this process for the second screw.

AD

Here's a tip: Be gentle while removing the screws. If you strip them or apply too much pressure, you might damage the stapler. If you feel the screwdriver slipping, stop immediately and use a different tool or seek professional help.

Opening the Stapler: Gently Does It

With both screws removed, it's time to open your Swingline stapler. Hold the stapler in one hand and gently pull the two halves apart with the other hand. You may feel some resistance, as the stapler has been closed for a while. Be patient and persist gently.

If the stapler still won't open, don't force it. Check if there are any additional screws or latches holding the stapler closed. Sometimes, manufacturers may include hidden screws or locking mechanisms to prevent the stapler from opening accidentally.

AD

Cleaning Your Swingline Stapler

With your stapler finally open, it's time to clean the inside. Use your small brush to remove any dust, debris, or miscellaneous staples. Be thorough, as a clean stapler performs better and lasts longer.

A word of caution: Be careful not to lose any small parts while cleaning. Keep an eye on them and use tweezers if necessary. If you lose a critical part, your stapler might not function properly anymore.

Reassembling Your Swingline Stapler

After cleaning, the next step is to put your stapler back together. To do this, align the two halves of the stapler carefully and push them together. You should feel the halves click into place when properly aligned.

AD

Once you've secured the two halves together, it's time to replace the screws. Hold the stapler in place with one hand and use your screwdriver to turn the screws clockwise until they're tight but not overly so. Be careful not to strip the screws or damage the stapler.

Alternative Opening Method: Latch-Type Staplers

Earlier, we mentioned that some Swingline staplers might have latches instead of screws. In this case, opening the stapler is a bit different. Instead of removing screws, you'll need to pop open the latches.

To do this, look for the tiny latches on each side of the stapler. Using your fingers or a narrow tool, gently press the latch on each side. You should feel the latches give way and the stapler open. If not, you might need to apply a bit more pressure, but be careful not to break the latches.

Once the latches are popped open, you can clean the stapler and reassemble it following the same steps as before.

Troubleshooting Common Issues

If you're having trouble opening your Swingline stapler, don't despair. Here are a few common issues and solutions:

  • Stuck screws: If the screws are stuck and won't budge, try applying a small amount of lubricant, like WD-40, to the screw head. Let it sit for a few minutes, then try again.
  • Broken or stripped screws: If a screw is broken or stripped, you might need to visit a hardware store to find a replacement. Be sure to bring the remaining screw with you for a precise match.
  • Won't close properly: If your stapler isn't closing properly, double-check that all parts are accounted for and that none are broken or missing. If everything seems in order, there might be a subtle alignment issue. Try opening and closing the stapler repeatedly until it works smoothly.

In most cases, though, following the steps outlined above should help you open your Swingline stapler flat with ease.

Remember, maintaining your Swingline stapler properly ensures its longevity and keeps it performing at its best. Make a habit of cleaning and inspecting your stapler at least once a month to prevent any issues.

Now that you know how to open and maintain your Swingline stapler, you can keep it in top condition. Happy stapling!

AD