stihl ms 250 how to start

Stihl MS 250 Starting Guide: Step-by-Step

By Christopher Robinson
AD

Starting your Stihl MS 250 chain saw can be a breeze once you're familiar with the process. This comprehensive guide will walk you through the steps, ensuring you operate your saw safely and efficiently. Let's delve into the starting process of your Stihl MS 250.

Before diving into the starting procedure, it's crucial to understand your chain saw's components. Familiarize yourself with the chain brake, throttle lock, and choke for a safe and responsive start.

Preparation and Safety Measures

Before you begin, ensure your Stihl MS 250 is in good condition. Inspect the chain, sprocket, and bar for any signs of wear. Make sure the fuel and oil are at appropriate levels. Always wear the correct protective gear, including gloves, safety glasses, and hearing protection.

AD
How to start the Stihl MS-250 chainsaw
How to start the Stihl MS-250 chainsaw
How to start your Stihl MS 250C Easy2Start Chainsaw.
How to start your Stihl MS 250C Easy2Start Chainsaw.
How to start your Stihl MS 250C Easy2Start Chainsaw.
How to start your Stihl MS 250C Easy2Start Chainsaw.

Fuel your MS 250 with clean, fresh gasoline and Stihl Hi-Tech 2-cycle oil in a 50:1 mixture. Never store a fuel-aid or a stabilizer-treated fuel in your chain saw for more than 30 days, as it can lead to clogging or damage the carburetor.

Starting the Stihl MS 250

Now that you're safety-prepared, let's move on to starting your chain saw.

Start Your Stihl TS400
Start Your Stihl TS400
How to pull the STIHL Excalisaw out of the STUMP!
How to pull the STIHL Excalisaw out of the STUMP!

Cold Weather Starting

Starting your MS 250 in cold weather requires a bit more attention. First, turn the fuel valve to 'OFF', and hold down the decompression valve on top of the engine. This will help you pull the starter cord more easily.

Once you've pulled the starter cord a few times, release the decompression valve, turn the fuel valve to 'ON', and pull the starter cord gently but firmly to start your chain saw.

AD

Warm Weather Starting

For warm weather starts, simply turn the fuel valve to 'ON' and pull the starter cord gently but firmly. If your saw doesn't start immediately, wait a few seconds and try again. AvoidVBartanic wracking the starter cord, as it can strain the starter rope and the engine.

After your chain saw starts, allow the engine to warm up for a few minutes before operating it at full throttle.

Troubleshooting Common Starting Issues

If your Stihl MS 250 doesn't start, there could be several reasons. Inspect the spark plug and replace it if necessary. Ensure the on/off choke switch is set correctly, and the air filter is clean. Check the fuel line for any kinks or blockages and verify the fuel supply.

AD

If the engine cranks but won't start, ensure the spark is good, and the fuel is reaching the carburetor. If the engine backfires, it might be flooding. Allow the engine to idle until it runs out of gas, then attempt to start it again.

With your Stihl MS 250 now firing up smoothly, you're ready to tackle your woodworking projects. Always maintain your chain saw regularly to ensure its longevity and performance. Keep your blade sharpened, the air filter clean, and the chain tensioned properly for optimal results.

AD