Stihl FS 38: How to Start Your Chainsaw Safely
Starting your STIHL FS 38 trimmer is a straightforward process that ensures your lawn edges and hard-to-reach areas are always neatly maintained. With its powerful engine and reliable performance, the FS 38 is a fantastic tool for both hobbyists and professionals. This guide will walk you through the simple steps to get your trimmer up and running securely.
Before we dive into the starting procedure, ensure your FS 38 is correctly assembled, the fuel tank is filled with fresh gas, and the trimmer line spool is properly wound. Additionally, always follow STIHL's safety guidelines when operating your trimmer.
Preparing Your STIHL FS 38
Before you start your trimmer, it's crucial to prepare it for use. This includes inspecting the machine, filling the fuel tank, and setting the line.
Inspect your FS 38 for any damage or loose components. Check the air filter, spark plug, and trimmer line. If necessary, replace or adjust these parts according to STIHL's user manual. Always ensure you're using the correct fuel and trimmer line for your model.
Filling the Fuel Tank
To fill the fuel tank,.remove the protective cap and use the funnel provided to pour clean, fresh fuel into the tank. Be careful not to overfill, as excess fuel can cause your trimmer to malfunction.
STIHL recommends using their own brand of fuel or a high-quality, unleaded gasoline with an octane number of at least 90. Never use gasoline containing more than 10% ethanol or any other fuel types, as these can damage your trimmer's engine.
Setting the Trimmer Line
If your trimmer line needs replacing, use an appropriate STIHL line for your FS 38 model. Insert the line into the head, ensuring it's wound properly around the spool. The end of the line should be left hanging out of the head, ready for feeding.
To set the line length, hold the trimmer head firmly and pull the line out to your desired cutting width. Cut the excess line using the line-cutting notch provided on the trimmer head housing. Always ensure the correct line length for optimal cutting performance and user safety.
Starting Your STIHL FS 38
Now that your FS 38 is prepared, it's time to start your trimmer. Follow these steps for a smooth and safe start-up.
First, engage the filler cap to prevent the fuel from flowing out while starting. Press and hold the purple primer bulb, located on the fuel tank, to supply fuel to the carburetor.
Starting a Warm Trimmer
If your FS 38 is already warm from previous use, start by engaging the lock-off/on switch to the 'I' position. Then, press the start/stop switch once to engage the ignition system and pull the starting rope gently but firmly until the engine starts.
It's essential to allow your trimmer to warm up for a minute or two before using it, giving the engine oil time to circulate and lubricate the moving parts correctly. While the engine is warming up, keep the trimmer head off the ground to avoid damaging the line.
Starting a Cold Trimmer
For cold starts, follow the same initial steps as a warm start, but with an additional step to help the engine turn over. After pulling the starting rope once, release it just before it tightens, allowing it to coast back to its original position. Repeat this process three to five times to build up some momentum in the engine.
On the sixth pull, as the rope tightens, squeeze the throttle gently and continue pulling until the engine starts. Once the engine is running, allow it to warm up for a few minutes before operating it at full throttle.
Congratulations! Your STIHL FS 38 trimmer is now up and running, ready to tackle those pesky overgrown edges and hard-to-reach areas. Always remember to follow STIHL's safety guidelines and maintain your trimmer regularly for optimal performance and longevity. Happy trimming!