Samsung Washer: How to Drain Water Step by Step
Samsung washers are renowned for their sleek design and efficient operations. However, like any appliance, they require regular maintenance to ensure optimal performance. One crucial aspect of this maintenance is knowing how to drain water from your Samsung washer, especially when you need to clean the drain pump or hose, or simply want to minimize mold and mildew growth.
But first, it's important to note that safety should always be your top priority. Before starting any draining process, ensure that your washer is unplugged from the power source, and that the water supply has been turned off. With that in mind, let's delve into how to safely and effectively drain water from your Samsung washer.
Manual Drain Method
The first method to drain water from your Samsung washer is the manual process. This method is typically used when you need to completely empty the washer, for instance, when you want to clean the drum, remove a trapped object, or remedy a standing water issue.
To manually drain your Samsung washer, follow these steps:
Locating the Drain Screw
The drain screw is usually located at the front bottom of your Samsung washer. It's a small, round cap, which might be marked with the word 'Drain'.
Using a 13mm socket wrench, turn the drain screw clockwise to secure it. Then, turn it counterclockwise to loosen it. Be cautious not to over-tighten or over-loosen the screw, as this could cause water leaks or make it difficult to re-tighten.
Draining the Water
Once the drain screw has been successfully loosened, water will start draining out of the washer. Place a bucket or a large bowl underneath the drain screw to collect the water. Be prepared, as this process might take a few minutes, depending on the amount of water in the washer.
After all the water has drained, tighten the drain screw back into its original position using your 13mm socket wrench. Remember to keep your washer unplugged until you've finished all your maintenance tasks.
Using the Self-Clean Cycle
Samsung washers come with a self-clean cycle designed to clean the washer's drum and remove any buildup of detergent, calcium, or other contaminants. This cycle also helps to drain water from the washer.
To use the self-clean cycle, follow these steps:
Accessing the Self-Clean Cycle
First, you'll need to access the self-clean cycle on your Samsung washer. The exact process might vary slightly depending on your washer's model. Typically, you'll find this option under the 'Special Cycles' or 'Additional Options' menu on your washer's interface.
On some models, you might need to press the 'Power' button once, then press and hold the 'Self Clean' button for a few seconds. Consult your washer's user manual for the most accurate instructions.
Running the Self-Clean Cycle
Once you've successfully accessed the self-clean cycle, you can start the cycle by pressing the 'Start' or 'Spin' button. The exact duration of the cycle will depend on your washer's model, but it typically lasts for around 3 hours and should not be operated while you're away from home.
After the cycle has finished, ensure that the washer is unplugged and the water supply is turned off before opening the door to empty any remaining water from the drain area. Regular use of the self-clean cycle can help maintain your washer, minimize the growth of mold and mildew, and maximize its lifespan.
In conclusion, draining water from your Samsung washer is a straightforward process that can be done manually or via the self-clean cycle. Regular drainage helps keep your washer in top condition, prevents mold and mildew growth, and ensures that it continues to provide the excellent performance you've come to expect from Samsung. Always remember to prioritize safety by unplugging your washer and turning off the water supply before beginning any maintenance tasks. Happy washing!