rappel how to

Mastering the Art of Rappelling: A Complete Guide on 'How to'

By Olivia Garcia
AD

Mastering the art of rappel, a crucial skill for climbers, cavers, and rescue professionals, involves a combination of understanding physics, employing precise techniques, and maintaining unwavering focus. Whether you're descending a steep cliff or navigating a deep cave, the ability to safely and efficiently rappel can open up a world of vertical exploration.

Before we dive into the steps, let's first understand what rappel is not. It's not simply letting yourself fall down a rope. Rappel, derived from the French term 'descendre en rappel,' is a controlled descent, where you're guiding your movement down a rope, not the other way around. Now, let's explore how to rappel safely and effectively.

Understanding Your Gear

Before we begin, familiarize yourself with your equipment. You'll need a harness, a rappelling device (like an ATC or figure-8), a dynamic rope rated for climbing, carabiners, slings, and tape to protect the rope against sharp rock edges.

AD
instructions on how to use an emergency rappel in the woods and mountains, with pictures showing
instructions on how to use an emergency rappel in the woods and mountains, with pictures showing
How To Rappel – A Practical Guide
How To Rappel – A Practical Guide
Abseiling (Rappelling) Explained - VDiff Climbing
Abseiling (Rappelling) Explained - VDiff Climbing

Additionally, always double-check your knots and ensure your harness and helmet are correctly secured. Safety is paramount in any rappelling endeavor.

Tying In and Securing Your Devices

Start by tying into your harness using a secure knot such as an 8-follow-through or double-fisherman's knot. Then, attach your rappel device to your harness using a carabiner. Clip the rope into the device, ensuring it's running through the correct side (for an ATC, the rope goes through the smaller hole)

Rappel Seat – how to create a rappel seat out of rope.
Rappel Seat – how to create a rappel seat out of rope.
How to Rappel with the Black Diamond ATC
How to Rappel with the Black Diamond ATC

Once your device is secured, attach a carabiner with a sling or quickdraw to your harness and clip it to the rope below your device. This acts as a backup in case your primary connection fails.

Checking the Setup

Before you embark on your descent, perform a thorough equipment check. Ensure your harness is snug, your knots are secure, and all gear is functioning correctly. Check the rope for any obstructions or damage, and make sure you're comfortable with the setup.

AD

Also, communicate with your belayer and backup belayer (if you have one). Clear signals and open communication can prevent accidents and ensure a smooth operation.

Mastering the Rappel Technique

Now that your equipment is secure, let's focus on the rappel technique. The goal is to maintain control throughout the descent while minimizing stress on your equipment and keeping your body protected.

The classic breaking hand technique is recommended for most situations. It involves using both hands to control the rope and a locking carabiner to store the moving rope tail for faster descents.

AD

Breaking Hand Technique

Start with your brakes hand (typically your stronger hand) holding the rope below the device with both hands. Your non-braking hand holds the gear below your brake hand. As you lean back and begin to descend, bend your elbows so they're at a 90-degree angle, forming a 'V' shape with your arms.

To change speed, you can straighten your arms to slow down or bend them more to speed up. Always keep your feet against the wall or cliff to maintain a stable position. If you need to pinch the rope with your breaking hand to slow down, that's fine, but never completely stop the rope as it can cause the carabiner to jam.

Body Positioning and Safety

Keep your body close to the wall to minimize the amount of force on the rope and your equipment. Maintain three points of contact at all times - either one foot and two hands or two feet and one hand. This ensures stability and prevents you from spinning or swinging.

AD

Protect yourself from the rope by keeping it away from your body. In case of a fall, the rope should fall away from you, not into you. Also, be mindful of where you place your feet. Avoid stepping on the rope and watch for hazards below.

Rappelling Off Anchors

Before you begin your descent, ensure the anchor above is sound and the rope is tied correctly to it with a protective system in place. Learn different anchor building techniques and understand how to evaluate the strength of an existing anchor.

When rappelling off an anchor, always make sure the rope is long enough to reach the ground, plus an extra 6 feet for safety. The rope should ideally hang freely without any kinks or twists that could cause it to get caught.

Rappelijng With a Partner

Sometimes, you might need to rappel with a partner. This is typically done in a tandem configuration, where both climbers are connected to the same rope. The belayer keeps the climber at a safe distance from the cliff face and controls the pace of the descent.

Before starting, rehearse the process with your partner to ensure both of you understand your roles and responsibilities. Always maintain clear communication and follow your pre-planned signals.

Practice makes perfect in rappelling. Start on low, controlled drops and gradually move to higher and more challenging descents as your skills and confidence grow. Regularly review your techniques, check your gear, and adhere to safety protocols. Embrace the thrill of vertical exploration while prioritizing safety.

AD