performance plus rheem water heater how to turn on

Performance Plus Rheem Water Heater: Easy Steps to Turn On

By Olivia Young
AD

Planning to switch on your Performance Plus Rheem water heater for the first time or need a quick reminder of the process? You've come to the right place. Let's guide you through this straightforward process, ensuring your hot water needs are met promptly and safely.

First, familiarize yourself with your water heater's panel. Rheem's Performance Plus series features a user-friendly control panel that makes operation a breeze. If you're unsure, don't hesitate to consult your user manual. Now, let's dive into the steps to turn on your water heater.

Understanding Your Water Heater's Control Panel

Before you start, get to know your Rheem Performance Plus water heater's control panel. It usually displays the current mode (like 'H', 'L', or 'Vacation') and allows you to adjust settings. Understanding this layout will help you navigate the process smoothly.

AD
Rheem Water Heater: Performance Vs. Performance Plus
Rheem Water Heater: Performance Vs. Performance Plus
How to Turn off Water Heater Power
How to Turn off Water Heater Power
a person is working on an electrical panel with wires and plugs attached to it
a person is working on an electrical panel with wires and plugs attached to it

Safety tip: Always ensure the power is off before performing any sort of maintenance or operation on your water heater. Locate your home's main electrical panel and turn off the breaker connected to your water heater.

Setting the Temperature

Your Rheem Performance Plus water heater offers precise temperature control, from 100°F to 140°F. Most users set their water heaters between 120°F and 140°F for optimal performance and energy efficiency. Here's how to adjust the temperature:

How To Turn On a Water Heater and Adjust Its Temperature
How To Turn On a Water Heater and Adjust Its Temperature
How Long Does Rheem Water Heater Last?
How Long Does Rheem Water Heater Last?

1. Locate the temperature dial on your water heater's control panel. 2. Rotate the dial clockwise to increase the temperature or counter-clockwise to decrease it. 3. Once set, allow 24 hours for the water to reheat to your desired temperature.

Switching to the Desired Mode

Rheem Performance Plus water heaters offer multiple modes to suit different needs. Here are the most common modes:

AD
  • H: Heating - This mode is ideal for everyday use. It maintains your set temperature continuously.
  • L: Low - In this mode, the heater operates intermittently to maintain a lower temperature, which can help save energy.
  • Vacation: This mode helps you save energy when you're away. It turns off the heating elements entirely.

To switch modes:

1. Press the mode button on your control panel until the target mode appears. 2. Allow a few minutes for the system to adjust to the new mode.

Rinsing Your Water Heater Tank

Before using your water heater for the first time, it's crucial to rinse the tank to remove any sediment left over from manufacturing or installation. This step ensures you have clean, hot water from the beginning.

AD

Note: This process involves opening your water heater's drain valve and making sure it's properly closed afterward. If you're unsure about any part of this process, consult a professional plumber for assistance.

Locating the Drain Valve and A Garden Hose

The drain valve is typically located at the bottom of your water heater, near the cold water inlet and hot water outlet. You'll also need a garden hose to connect to the valve for draining.

Draining the Water Heater

Now that you've gathered your equipment, follow these steps to drain your water heater:

AD
  1. Attach the garden hose to the drain valve, ensuring the other end is directed away from your home's foundation and into a suitable drainage area.
  2. Turn off both the cold and hot water supply valves. These are usually located near the top of your water heater.
  3. Open the drain valve by rotating it counter-clockwise.
  4. Open a nearby hot water faucet to allow air to enter the system and the tank to drain completely.
  5. Once the tank is empty, close the drain valve and remove the hose.
  6. Refill the tank by turning the cold water supply valves back on. Allow the tank to fill completely.

Now you're ready to turn on your Rheem Performance Plus water heater! Reconnect the power at your home's main electrical panel, and your water heater should start heating the water according to your set temperature and mode. Enjoy the convenience and energy efficiency of your new water heater.

Remember, regular maintenance, like flushing your water heater annually, helps keep it running efficiently. If you have any concerns or need further assistance, don't hesitate to contact a licensed professional for help.

AD