"Discover How to Remove Links from MVMT Watches"
Ever found yourself with an MVMT watch, wondering how to remove the links to resize or adjust it to your wrist? You're not alone. While MVMT watches come with an adjustable strap, removing the links from the bracelet can be a little tricky if you're not sure what you're doing. But fear not, we've got you covered. Let's dive in and explore how to remove links from your MVMT watch step by step.
Before we begin, a word of caution: watchmaking can be delicate work. If you're not confident in your ability to handle the tools and process, it's best to leave this to a professional. Also, make sure you're working in a well-lit area with all the necessary tools at hand. Here's what you'll need:
Understanding Your Watch and the Tools You'll Need
First, let's ensure you've got the right tools for the job. You'll need a pry tool or a flathead screwdriver, and a pair of watch pins (these are often included with your watch, so check your packaging). It's also useful to have a pair of keluang pliers for easier removal of the pins.
Your MVMT watch bracelet is likely made of stainless steel links, connected by a pin and collar system. The pins hold the links together, and the collars, also known as end pieces, keep the pins secure. Familiarizing yourself with these components will help you throughout the process.
Preparing Your Watch Before Removing Links
Finding the Right Link to Remove
Before you start removing any links, it's crucial to identify which ones need to go. The links closest to the clasp are typically considered the next to be removed if the watch feels too loose. However, if the watch already feels quite snug, you might want to start from the other end.
Put the watch on your wrist to check the fit, and mark the link you want to remove with a pen. This will serve as a guide while you're working.
Securing the Watch
To prevent the watch from moving around while you're working, you can secure it to a soft, flat surface. A block of foam or a padded area of your workbench should do the trick. This will make the process more manageable and reduce the risk of damaging your watch.
Removing Links from Your MVMT Watch
Removing the End Piece (Collar)
Using your pry tool or flathead screwdriver, carefully wedge it into the opening on the side of the end piece. Apply gentle, steady pressure to twist the end piece off. It might take a little bit of pressure and some wiggling, but it should come off with some persuasion.
Be patient and careful not to scratch or damage the link. If the end piece is particularly stubborn, you might need to use your keluang pliers to apply some extra leverage.
Extracting the Pin
Once the end piece is removed, you'll see the pin holding the link together. Using your keluang pliers, grip the pin firmly and carefully extract it from the link. You might need to push it out from both sides of the link to work it free.
If your watch didn't come with extra pins, it's crucial to keep track of the one you remove. You'll need it to reinstall the end piece later on.
Re-assembling Your Watch
Reinserting the Pin
Now that you've removed the link you wanted, it's time to put the watch back together. Reinsert the pin into the link immediately adjacent to the one you removed. Make sure it's positioned properly and fully seated in the hole.
If you removed a pin, now's the time to use it to replace the one you took out. If you found that the removed pin was too short to reinsert (some watches use very short pins), you'll need to find a replacement that's the same gauge and length.
Re-setting the End Piece
Finally, reattach the end piece, or collar, that you removed earlier. Use your pry tool to gently tap it back into place, making sure it's fully seated and secure.
Repeat these steps for additional links as needed. Always remember to put your watch on and check the fit after each link removal to ensure you're making progress towards your goal.
Congratulations, you've successfully removed links from your MVMT watch! Wearing a watch that fits just right is a satisfying feeling, and now you know how to adjust your MVMT watch to make it perfect for your wrist. Happy watching!