Kasa: How to Change WiFi Step-by-Step
So, you've just set up your new Kasa smart light bulb and are ready to connect it to your Wi-Fi network? Fantastic! Kasa smart home devices by TP-Link offer easy and intuitive setup processes. Today, we're going to guide you through the simple steps to change the Wi-Fi network for your Kasa device.
Before we dive in, ensure you have the Kasa app installed on your smartphone from either the Google Play Store (Android) or the App Store (iOS). If not, download and install it now. Also, gather your new Wi-Fi network details – the SSID (network name) and password – as you'll need them during the process.
Preparation: Factory Reset & Network Disconnection
The first step involves putting your Kasa device into 'Setup Mode' by performing a factory reset. Don't worry; this will not erase any personalization settings you've applied. It merely resets the device's network connection.
Power on your Kasa device, then press and hold the reset button (usually a small pinhole) on the device using a paper clip or a similar object. Keep holding the button for about 10 seconds until the device's LED starts flashing. This indicates that the device is now in 'Setup Mode' and disconnected from its previous network.
Power Cycle & Reboot
A power cycle can help refresh your device and prepare it for a new connection. If your Kasa device is a light bulb, turn it off and then back on again. For other Kasa devices like plugs or cameras, unplug them and then plug them back in.
If your device has a reboot option within the Kasa app, use it to reboot your connected device. This can help ensure that your device is ready for a new network connection.
Delete the Old Network from Kasa App
Before adding a new network, ensure you delete the old one from the Kasa app to avoid any conflicts. Open the Kasa app, navigate to the 'Devices' section, and tap on the device you want to connect to a new network.
Scroll down to the 'Wi-Fi Settings' section, then tap on the SSID (network name) of the current network. The app will ask you to confirm the removal – tap on 'Remove' to delete the old network.
Adding a New Wi-Fi Network
Now that your Kasa device is prepared and the old network is removed, it's time to connect your device to your new Wi-Fi network. Remember to keep your smartphone connected to a 2.4GHz Wi-Fi network during this process, as Kasa devices only support 2.4GHz networks.
In the Kasa app, tap on the '+' icon on the top right corner of the screen and select 'Add Device'. Choose the category of your Kasa device (e.g., 'Smart Light', 'Smart Plug', etc.) and follow the on-screen instructions. When prompted, confirm that your device is in 'Setup Mode'.
Select & Connect to New Wi-Fi Network
On the next screen, you'll see the available Wi-Fi networks. Tap on your new network's SSID. If you're adding a password-protected network, the app will ask you to enter the password. Be sure to use the correct password – it's case-sensitive!
The app will now try to connect your Kasa device to the new network. Keep your device powered on and wait for the connection process to complete. Once connected, you'll receive a confirmation message in the app. Repeat this process for any additional Kasa devices you want to connect to the new network.
And there you have it! You've successfully changed the Wi-Fi network for your Kasa device. Now you can enjoy the convenience of controlling your smart home devices effortlessly via the Kasa app.