Husqvarna Weed Eater: Easy Steps to Replace Your String
Taming your garden's unruly weeds is an annual challenge, but with the Husqvarna weed eater by your side, it becomes a manageable task. This powerful, yet maneuverable tool is designed to cut through tough weeds and grass with ease. However, like all tools, the Husqvarna weed eater requires some maintenance to keep it running smoothly. One such maintenance task is replacing the string, which, despite its robustness, can wear out or break over time. In this comprehensive guide, we'll walk you through the process of how to replace the string on your Husqvarna weed eater, ensuring your tool is always ready for action.
Before we dive into the detailed steps, let's understand why you might need to replace the string. The weed eater's string, or line, is designed to spin at high speeds, slicing through weeds and grass. Over time, this constant use can cause the string to fray, break, or simply wear down. Additionally, if the string is not properly tensioned, it can cause the weed eater to vibrate excessively, potentially damaging the trimmer head. So, let's get into the nitty-gritty of string replacement.
Understanding Your Weed Eater's Trimmer Head
Before you embark on the[string replacement process](https://www.husqvarna.com/global-sustainability/safety-articles/how-to-replace-a-weed-eaters-string/), it's crucial to understand the anatomy of your Husqvarna weed eater's trimmer head. The trimmer head, also known as the spool, houses the line and is responsible for feeding it out as you work. It's usually made of robust plastic and is designed to withstand the forces generated by the spinning line.
Husqvarna offers several types of trimmer heads, including automatic feed heads and bump feed heads. The difference lies in how they dispense line. Automatic feed heads automatically release line as you work, while bump feed heads require you to bump the head on the ground to release more line. Understanding your specific trimmer head type will help streamline the string replacement process.
Gathering Your Tools and Parts
Before you begin, ensure you have all the necessary tools and parts on hand. For most Husqvarna weed eaters, you'll need a new spool of line (usually 0.080" or 0.095" in diameter, depending on your model), a flathead screwdriver, and a pair of scissors or a line cutter. Some models may also require a hex key or an Allen wrench.
Always remember to unplug your weed eater and allow the engine to cool before starting any maintenance work. Safety first, right? Now, let's dive into the actual process of replacing the string.
Removing the Old Spool
Start by turning the trimmer head (spool) counterclockwise to release any remaining line. Once you've removed as much line as possible, locate the retaining bolt at the base of the spool. Using a flathead screwdriver, hex key, or Allen wrench (depending on your model), unscrew and remove the bolt. This will allow you to withdraw the old spool.
Some Husqvarna weed eaters use a release button or a spring-loaded system to remove the spool. If your model uses one of these systems, press the button or push the spool in, then turn it counterclockwise to remove it. Always consult your user manual if you're unsure about the removal process for your specific model.
Installing the New Spool
With the old spool removed, it's time to install the new one. Start by unwinding the new line from the spool. Most Husqvarna lines come wound in an 'S' pattern. Unwind enough line to create a tail around 6 to 7 inches long. This will help you thread the line through the trimmer head.
Locate the hole in the new spool through which the line will pass. Thread the line through this hole, careful not to let too much line slip through. You should have around 6 to 7 inches of line poking out from the center of the spool. This line will be the point from which you'll start cutting.
Winding the New Line
Now, it's time to wind the new line onto the spool. Start by finding the beginning of the 'S' pattern in the unwound line. This will be your starting point. Begin winding the line around the spool in the direction indicated by the arrows inside the spool (usually clockwise). Ensure you maintain the 'S' pattern as you wind, and keep the line taut but not excessively tight.
As you wind, periodically pull the free end of the line to ensure it's secure and to prevent it from bunching up. Once you've wound approximately 6 to 7 feet of line onto the spool (consult your user manual for the exact amount), prepare to thread the line through the exit hole in the spool. The exit hole should be on the opposite side of the spool from where you started winding.
Threading the Line and Securing the Spool
Thread the free end of the line through the exit hole in the spool. Ensure you leave around 6 to 7 inches of line on the outside of the spool. This will be the cutting line. Once you've threaded the line, it's time to secure the spool in place.
Hold the spool in place and insert the retaining bolt. Gently pull the cutting line to ensure the spool doesn't turn as you tighten the bolt. Tighten the bolt by hand, using a flathead screwdriver, hex key, or Allen wrench, until it's secure but not overly tight. You should still be able to turn the spool by hand to feed out more line.
With the spool secure, your Husqvarna weed eater is ready to tackle the toughest weeds in your garden. Always ensure you pull the starter handle slowly and steadily when starting your weed eater, and never force the line out of the trimmer head. Instead, let it feed out naturally under tension as you work. Regularly inspect the line for signs of wear, and replace it as needed to keep your weed eater in top condition.
Happy gardening! Keeping your Husqvarna weed eater's line in good condition ensures you're always ready for the annual war against weeds. Enjoy your clean, tidy garden, and remember, with the right tools and a little know-how, there's no challenge too great. Happy trimming!"