how to zero an acog at a 25 meter target

Zeroing an ACog: Mastering the 25m Target

By Ashley Clark
AD

Alright, you've lined up your 25-meter target and your ACOG-equipped rifle is mounted ready. You're about to learn how to zero your ACOG, but first, let's understand what zeroing means.

Zeroing an optic means aligning its reticle with the point of impact (POI) of your rifle at a specific range. In this case, we're focusing on 25 meters. Once you've zeroed your ACOG at this distance, your aim should be accurate at 25 meters, and you'll have a solid foundation for zeroing at other ranges.

Preparation: Getting Started

Before you start, ensure your ACOG is mounted securely and that your rifle is clean and well-maintained. You'll also need a reliable set of ammo, a target, a spotting scope or binoculars, and a few tools like a screwdriver and a rifle vice.

AD
Riflescope Setup – Part 3: Rifle and Scope Calibration
Riflescope Setup – Part 3: Rifle and Scope Calibration
M16 A2 and A4 Zeroing Target Red (32110)
M16 A2 and A4 Zeroing Target Red (32110)
Universal Laser Boresighter Kit: Green Laser, 32 Adapters, Anti-Cant Level & Parallel Calibration for .17 to 12GA. - green light / United States
Universal Laser Boresighter Kit: Green Laser, 32 Adapters, Anti-Cant Level & Parallel Calibration for .17 to 12GA. - green light / United States

Safety first: Always treat your rifle as if it's loaded, keep your finger off the trigger until you're ready to shoot, and never point it at anything you don't intend to shoot.

Setting Up Your Target

For 25 meters, a standard A4 or letter-sized target works well. Tape it to a flat surface or a target stand, ensuring it's squared to the direction you'll be firing from. This ensures the target's center (your aim point) is also square to your firing path.

Trijicon and Primary Arms collaboration | The ACOG with ACSS reticle
Trijicon and Primary Arms collaboration | The ACOG with ACSS reticle
how to zero an acog at a 25 meter target
how to zero an acog at a 25 meter target

Mark the center of the target clearly. This will be your aim point at 25 meters, and where you want your shot to hit after adjusting your ACOG.

Mounting Your Rifle Securely

Use a rifle vice to secure your rifle. This keeps it steady during adjustment, improving accuracy during zeroing. Ensure the rifle is at a comfortable height for you to maintain a solid stance and posture.

AD

The vice should not apply excessive pressure. Just enough to keep the rifle stable. Tighten it gradually, checking the rifle's alignment as you go.

Zeroing Your ACOG

Now that you're set up, let's dive into zeroing your ACOG. Remember, patience and careful adjustment are key here.

Starting with an 'out of the box' ACOG, it might not be perfectly aligned. Don't worry; we'll correct that.

AD

Taking Your First Shot

Load your rifle and assume a stable, comfortable position. Look through your ACOG. The reticle should be in the center of your field of view. If not, adjust your head position or cheek weld until it is.

Fire a single shot at the center of your target. Note the POI (Point Of Impact). Now, it's time to start adjusting your ACOG.

Adjusting Your ACOG

ACOGs have two adjustment knobs: one for windage (left/right) and one for elevation (up/down). Both typically have 1/4 MOA clicked adjustments, meaning each click moves the point of impact by approximately 0.25 inches at 100 yards.

AD

Using your spotting scope or binoculars, observe where your shot hit. If it's above, below, left, or right of the center, make the necessary adjustments to your ACOG. Remember, small adjustments are better than large ones.

The first few shots might not hit the bullseye, but keep adjusting based on where your shots land. With patience and careful adjustment, you'll eventually see your shots hitting closer and closer to the center. When you're consistently hitting the bullseye, you've successfully zeroed your ACOG at 25 meters.

Congratulations! You've just zeroed your ACOG at 25 meters. Remember, this is a skill that improves with practice. The more you zero, the better you'll get. So, keep practicing and enjoy the precision and confidence that comes with a well-zeroed optic.

AD