how to winterize a kawasaki jet ski

Winterize Your Kawasaki Jet Ski: Step-by-Step Guide

By David Clark
AD

As the weather turns cooler and water activities start to wind down, it's essential to prepare your Kawasaki Jet Ski for the upcoming winter months. Winterizing your watercraft is crucial to prevent damage from cold temperatures, moisture, and prolonged storage. This comprehensive guide will walk you through the process of winterizing your Kawasaki Jet Ski, ensuring it's ready for next season.

Before we dive into the details, remember that winterization is a careful process that requires proper tools and knowledge. If you're unsure about any step, consult your Jet Ski's owner's manual or a licensed technician. Now, let's get started.

Preparing Your Jet Ski for Storage

Before you begin the winterization process, there are a few preparatory steps to ensure your Jet Ski is ready for storage. First, make sure your Jet Ski is clean. A clean watercraft makes the winterization process smoother and prevents grime from causing corrosion or damage during storage.

AD
How To Winterize A Jet Ski
How To Winterize A Jet Ski
How to Winterize a Jet Ski for Storage | Extra Space Storage
How to Winterize a Jet Ski for Storage | Extra Space Storage
How to Restore Faded Jet Ski
How to Restore Faded Jet Ski

Next, check your Jet Ski's fuel level. Low fuel levels can lead to condensation in the fuel system, which can cause corrosion and potential damage. We recommend adding a fuel stabilizer, which will help prevent ethanol-based fuels from separating and keep your engine running smoothly in the spring.

Draining the Engine and Carburetor

One of the most critical winterization steps is draining the engine and carburetor. This process involves removing any water from the Jet Ski's cooling system and ensuring there's no water left in the engine block. To do this, you'll need to locate and open the drain plugs in the lower part of the engine. Once opened, allow the water to drain completely.

10 Steps to Winterize a Jet Ski
10 Steps to Winterize a Jet Ski
How to Winterize Sea-doo GTI SE 130 Jet Ski to Save Money DIY - Not Sealed
How to Winterize Sea-doo GTI SE 130 Jet Ski to Save Money DIY - Not Sealed

Don't forget to drain the carburetor as well. This can be done by collapse the fuel line and opening the drain plug located at the base of the carburetor. This step is essential, as trapped water in the carburetor can lead to rust and damage to the engine.

Lubricating the Engine

After draining the engine and carburetor, it's essential to apply a fogging oil to the engine's internal parts. This application coats the engine's internal components, protecting them from rust and moisture during the off-season. To apply the fogging oil, start your Jet Ski's engine and spray the oil into the intake duct.

AD

The engine should be allowed to run for a few minutes to ensure the oil is dispersed throughout the internal components. Once the engine has been running, turn it off and allow it to sit for a few more minutes to let the oil settle. This step is crucial to preventing internal corrosion and ensuring your Jet Ski starts when you're ready to hit the water next season.

Addressing the Cooling System

Next, let's turn our attention to the cooling system. The cooling system plays a vital role in maintaining your Jet Ski's engine temperature. Proper maintenance ensures your engine runs efficiently and prolongs its lifespan. Winterizing the cooling system involves several steps:

First, locate and remove the radiator hoses and drain them completely. Swap out the old antifreeze with a fresh batch and refill the radiator to the proper level. Before you replace the hoses, flush the system with freshwater to remove any leftover antifreeze.

AD

Inspecting and Cleaning the Intake Grates

Intake grates can accumulate debris, algae, and other contaminants throughout the riding season. To prevent damage to the pump and impeller, inspect and clean the intake grates before storing your Jet Ski for the winter. You can remove the grate using a screwdriver or similar tool and thoroughly clean it with freshwater. Additionally, inspect the impeller for any signs of wear or damage and replace it if necessary.

Once cleaned, reinstall the grate and ensure it's securely fastened. Removing and reinstalling the grate may require tools, so consult your Jet Ski's owner's manual for specific instructions.

Winterizing the Fuel System

Preventing water and moisture from entering the fuel system is crucial for maintaining your Jet Ski's engine. Winterizing the fuel system involves several steps, starting with adding a fuel stabilizer to your Jet Ski's gas tank. Fill the tank to the recommended level, as this will minimize the space for moisture to accumulate.

AD

After adding the fuel stabilizer, top off the tank with unleaded gasoline and run the engine for a few minutes to allow the stabilizer to circulate throughout the fuel system. This step is essential to prevent condensation and protect your Jet Ski's engine from corrosion and damage during storage.

Preparing for Storage

With the winterization process complete, it's time to prepare your Jet Ski for storage. Start by finding a suitable location to store your watercraft. A dry, cool, and well-ventilated area is ideal for long-term storage. If you must store your Jet Ski outdoors, consider covering it with a waterproof tarp to protect it from the elements.

Before storing your Jet Ski, make sure to disconnect the battery and allow it to charge in a climate-controlled environment. Storing a discharged battery can reduce its lifespan and lower its overall capacity. Additionally, remove any valuable items, such as life jackets, towels, or other equipment, to prevent theft or damage.

Supporting the Jet Ski

When storing your Jet Ski, it's essential to provide proper support to prevent damage to the hull and internal components. Remove the trailer if possible, and use blocks or stands to support the watercraft's hull. The hull should be level, with the bow elevated slightly to allow water to drain from the bilge.

Lubricate theJet Ski's running surface with a suitable lubricant, such as WD-40, to protect it from corrosion and moisture. Additionally, consider applying a protective coating to the hull to further safeguard it from the elements during storage.

Final Inspection and Documentation

Before locking up your Jet Ski for the winter, perform a final inspection to ensure everything is in working order. Check the engine, cooling system, and fuel system to ensure there are no leaks or signs of damage. Inspect the hull and body for any signs of目corrosion or damage, and address any concerns immediately.

Finally, document the winterization process, including the date and any relevant notes. This record will help you keep track of your Jet Ski's maintenance history and ensure you follow the proper winterization steps in subsequent years.

As the seasons change and you prepare to hit the water again, you can rest assured that your Kawasaki Jet Ski is well-maintained and ready to perform. Winterizing your Jet Ski is an essential part of ownership, and following these steps will help ensure your watercraft is in top shape for years to come. Happy boating, and we'll see you out on the water!

AD