Mastering Trimmer Line Replacement: A Step-by-Step Guide for Stihl Units
Winding trimmer line for your Stihl trimmer can seem like a daunting task, but with the right guidance, it's a breeze. Properly wound line ensures optimal performance and longevity of your trimmer, keeping your lawn tidy and well-maintained. Let's dive into the step-by-step process of how to wind trimmer line for Stihl equipment.
Before we begin, ensure you have the correct type of line for your Stihl trimmer. Different models require different line types and diameters. Consult your user manual or Stihl's website to confirm the suitable line for your specific model.
Preparation: Gather Your Equipment and Understand the Basics
Gather your Stihl trimmer, a spool of line, and a pair of scissors or line cutter. Familiarize yourself with the trimmer's head – it's usually gray or orange and has a small notch or hole. This is where you'll feed the line.
Stihl trimmers use a bump-feed or auto-feed system. Understanding how your trimmer's head works ensures you're winding the line correctly and minimizing waste.
Identifying the Type of Trimmer Head
Stihl trimmers come with different head types. The most common are the Easy2Start and the Ultra2Start. Each has a specific method to release the head for rewinding. Consult your user manual or Stihl's website to identify your head type and learn how to release it.
**For Easy2Start heads**:
- Hold the trimmer with the head pointing upwards.
- Pull the line release button on the side of the head.
- The head should turn freely. If it doesn't, gently pull out the line to free the ratchet.
Understanding the Bump-feed or Auto-feed System
A bump-feed head requires you to bump the head on the ground to release more line. An auto-feed head releases line as you use it, with no bumping required.
Understanding your head type ensures you're winding the line correctly. For bump-feed heads, wind the line clockwise. For auto-feed heads, wind the line counterclockwise.
Winding the Line: A Step-by-Step Guide
Once you've prepared your equipment and identified the type of trimmer head, you're ready to wind the line. Here's a step-by-step guide:
First, pull out the appropriate amount of line. Stihl recommends leaving 10 feet (3 meters) of line outside the head. Avoid cutting this line; it's used to measure and wind line into the head.
Winding the Line onto the Head
With the head still in your hand, hold the end of the line. Begin winding the line around the head in the correct direction (clockwise for bump-feed, counterclockwise for auto-feed). Keep the line taut as you wind, overlapping each layer slightly.
Continue winding until you have approximately 10-15 feet (3-4.5 meters) of line wound onto the head. Make sure the final layer is tightly wound without any gaps. You'll use the excess line to secure the new line to the head.
Securing the New Line
Once the line is wound, tuck the end of the line into the spin chamber (the hole in the center of the head). Rotate the head to ensure the line stays secure. For some models, you might need to use atool to secure the line.
Now, pull out the desired length of line from the head. For most trimmers, Stihl recommends leaving 8-12 inches (20-30 cm) of line outside the head. Cut this line with scissors or a line cutter, making sure it's level with the head to ensure equal length on both sides.
Reassembling the Trimmer Head
To reassemble the head, align the notch or hole on the head with the corresponding feature on the trimmer shaft. Push the head until it clicks into place. For Easy2Start heads, this may require a gentle clockwise twist.
Before you start trimming, test the line release by bumping the head (for bump-feed heads) or making a few test cuts (for auto-feed heads). Listen for the line to release and ensure it's cutting evenly.
Congratulations, you've successfully wound trimmer line for your Stihl! Regularly inspecting and rewinding your line ensures optimal performance and longevity of your trimmer. Happy trimming!