how to wash dyson hepa filter

Mastering Dyson HEPA Filter Cleaning: A Step-by-Step Guide

By Jessica Young
AD

Keeping your Dyson HEPA filter clean is crucial for maintaining optimal air purification in your home or office. Not only does a clean filter ensure better air quality, but it also helps prolong the lifespan of your Dyson machine. Here's a step-by-step guide on how to clean your Dyson HEPA filter effectively and safely.

Before you begin, it's important to note that you should replace your HEPA filter every 12 months, or earlier if it's visible that it's clogged. Regular cleaning, however, can extend its life and keep it functioning efficiently. Let's dive into the cleaning process.

Understanding Your Dyson HEPA Filter

Your Dyson machine's HEPA (High-Efficiency Particulate Air) filter is designed to capture 99.97% of particles and allergens as small as 0.3 microns. It's located inside the machine, usually below the pre-filter or near the inlet grill. Understanding its location and function will help you clean it more effectively.

AD
Dyson DC58, DC59, DC59 & DC72 Motorhead, DC61, DC62 or DC74 - washing the filter
Dyson DC58, DC59, DC59 & DC72 Motorhead, DC61, DC62 or DC74 - washing the filter
Masterclass: Cleaning Your Dyson Vacuum
Masterclass: Cleaning Your Dyson Vacuum
How To Clean a HEPA Filter — Southern Living
How To Clean a HEPA Filter — Southern Living

Dyson HEPA filters are made of fiberglass and are designed to be cleaned, not replaced. Therefore, you can clean and reuse them, provided they're not damaged or worn out.

Gathering Your Equipment

Before you start, ensure you have the following equipment ready:

How to replace the filter on your Dyson Pure cool link™ purifying fan
How to replace the filter on your Dyson Pure cool link™ purifying fan
TUTORIAL: How to Reset Dyson TP04 Filters | Featured Tech (2020)
TUTORIAL: How to Reset Dyson TP04 Filters | Featured Tech (2020)
  • Cool, clean water
  • Lukewarm water
  • Mild detergent or dish soap
  • Soft-bristled brush (not provided by Dyson)
  • A basin or sink

Step-by-Step Cleaning Process

Now that you have everything you need, let's proceed with cleaning your HEPA filter.

  1. Turn Off and Unplug: Always remember to turn off and unplug your Dyson machine from the power source before starting the cleaning process.
  2. Locate and Remove the Filter: Consult your user manual to locate the HEPA filter in your specific Dyson model. Remove it carefully, making sure not to damage the filter or the machine.
  3. Clean the Filter: Gentle is the key when cleaning the HEPA filter. Here's how you do it:
    • Fill a basin or sink with cool, clean water.
    • Add a few drops of mild detergent or dish soap into the water.
    • Gently agitate the water to create suds.
    • Wet the HEPA filter using the suds, making sure not to submerge it entirely.
    • Use a soft-bristled brush to gently rub the filter, ensuring you don't scrub too hard or damage the filter's fibers.
  4. Rinse Thoroughly: After cleaning, rinse the HEPA filter thoroughly under cool, running water. Make sure to remove all soap residue.
  5. Soak in Lukewarm Water: Fill another basin with lukewarm water and soak the HEPA filter for about 5 minutes. This helps remove any remaining dirt or pollutants.
  6. Rinse Again and Allow to Dry: Rinse the HEPA filter one more time under cool, running water. Then, allow it to air dry completely, ideally overnight. Do not use a hairdryer or any other heat source to speed up the drying process.
  7. Reinstall the Filter: Once the HEPA filter is completely dry, reinstall it in your Dyson machine according to your user manual's instructions. Ensure it's placed correctly and securely.

Common Mistakes to Avoid

Here are some common mistakes you should avoid when cleaning your Dyson HEPA filter:

AD

Using Hot Water

Hot water can damage the fiberglass material of the HEPA filter, reducing its effectiveness and lifespan. Always use cool or lukewarm water when cleaning.

Scrubbing Too Hard

Avoid scrubbing the HEPA filter too hard as it can damage the fibers. Instead, use gentle brushing and rinsing motions.

Not Allowing the Filter to Air Dry

Using a hairdryer or any other heat source to speed up the drying process can damage the filter's fibers. Always allow the filter to air dry completely.

AD

Regularly cleaning your Dyson HEPA filter is essential to maintain optimal air purification. By following these steps and avoiding common mistakes, you can keep your filter in top condition, prolong its lifespan, and ensure your Dyson machine keeps your indoor air fresh and clean.

AD