how to use starting fluid on a lawn mower

How to Use Starting Fluid on a Lawn Mower

By Robert Lopez
AD

Is your lawn mower having trouble starting? You might be tempted to flood it with gas, but there's a better way to revive your mower using starting fluid. Also known as ether, this clear liquid is a useful tool designed to help kickstart your lawn mower's engine. In this guide, we'll walk you through the process of using starting fluid, from safety precautions to step-by-step application.

Before we dive in, remember that starting fluid is a highly flammable substance. Always keep it away from open flames, sparks, and hot surfaces. Store it in a cool, dry place away from children and pets. Now, let's learn how to use starting fluid on your lawn mower safely and effectively.

Understanding Starting Fluid

Starting fluid, often sold under different brand names likeenezene or starting fluid with ether, isn't just any old gas. It's a combination of highly volatile liquids that quickly evaporate and ignite when exposed to air and heat. The potent fumes created by starting fluid travel to your lawn mower's engine, providing an extra boost to help it start.

AD
Mower Starts With Starting Fluid But Won’t Stay Running? Here's Why
Mower Starts With Starting Fluid But Won’t Stay Running? Here's Why
Where to spray starter fluid in a lawnmower, step-by-step
Where to spray starter fluid in a lawnmower, step-by-step
Where to Put Starter Fluid in Lawn Mower: A Step-by-Step Guide
Where to Put Starter Fluid in Lawn Mower: A Step-by-Step Guide

Knowing how starting fluid works is crucial, as it helps you understand why you shouldn't reliesolely on it to start your mower. Starting fluid is a temporary solution, and consistently using it can cause harm to your engine. Now, let's discuss when and how to use starting fluid on your lawn mower.

When to Use Starting Fluid

Starting fluid should be used sparingly and only in specific situations. Here are some instances when it's helpful:

How to Use Starter Fluid on Lawn Mower: A Step-by-Step Guide for Easy Starting
How to Use Starter Fluid on Lawn Mower: A Step-by-Step Guide for Easy Starting
Lawnmower Only Starts With Starting Fluid! Step By Step Repair!
Lawnmower Only Starts With Starting Fluid! Step By Step Repair!
  • During cold or damp weather: The moisture in the air can make starting your mower difficult. A few squirts of starting fluid can help warm up the engine.
  • After your mower has been stored: If it's been a while since you last used your mower, it might need a quick spark from starting fluid to erinner its engine.
  • When the engine is flooded: If you've added too much gas to your mower, it can cause a 'flooded' engine, making it difficult to start. Use starting fluid to help dry out the engine.

When Not to Use Starting Fluid

As useful as starting fluid can be, there are situations when you should avoid it:

  • In continuous use: Using starting fluid repeatedly to start your mower can damage the engine, especially the piston rings and spark plugs. It can also cause your engine to run rough and misfire.
  • With hot engines: Never use starting fluid on a hot engine. The fumes could ignite, causing a fire or explosion. Always allow your engine to cool completely before applying starting fluid.
  • With fuel injectors: On newer lawn mowers, starting fluid can damage fuel injectors, as it doesn't mix well with diesel or synthetic oils used in modern engines.

How to Use Starting Fluid on Your Lawn Mower

Now that you know when and when not to use starting fluid, let's explore how to apply it safely and effectively.

AD

Before you start, ensure safety by:

  • Parking your lawn mower on a level surface.
  • Turning off the ignition and removing the key or spark plug wire.
  • Allowing the engine to cool completely.

Preparing the Engine

Before applying starting fluid, check your lawn mower's engine for any obstructions in the carburetor or air filter. If present, clear them to allow the fluid and air to flow freely.

Some lawn mowers have a primer bulb on the carburetor. If yours does, squeeze it a few times to draw fuel into the cylinder. This will help the starting fluid by providing a fresh supply of fuel.

AD

Applying Starting Fluid

With the engine prepared, it's time to apply the starting fluid. Follow these steps:

  1. Remove the lawn mower's air filter. This helps the starting fluid reach the engine.
  2. Starting at the top of the engine's cylinder, squirt a small amount (about 1-2 seconds) of starting fluid into the spark plug hole. Be careful not to overdo it; too much fluid can cause convenientengine problems.
  3. Replace the spark plug back into the hole, leaving it out for a moment to allow any remaining starting fluid to evaporate.
  4. Wait for about 30 seconds to a minute, allowing the starting fluid to settle into the engine.
  5. Return the air filter to its original position.

Starting the Engine

Once you've applied the starting fluid, it's time to start your lawn mower. Follow these final steps:

  • Reconnect the spark plug wire or turn the ignition back on.
  • Pump the throttle a few times to help draw the starting fluid into the engine.
  • Pull the starting cord slowly and steadily. If you've used the right amount of starting fluid, your lawn mower should start within a few pulls.
  • Allow your mower to warm up briefly before heading out to cut your lawn.

Alternatives to Starting Fluid

While starting fluid can help kickstart your lawn mower, it's not the only solution. Consider these alternatives:

AD

Fresh Gasoline: Ensure your mower's fuel tank is full of fresh gasoline. Old gas can cause starting troubles due to evaporation of its volatile components.

Carburetor Cleaner: Using a carburetor cleaner can help remove dirt and debris from your mower's engine, improving its performance and starting ability.

Regular Maintenance: Regularly servicing your lawn mower, including cleaning the air filter, replacing the spark plug, and draining old gas, can help prevent starting issues and reduce the need for starting fluid.

Tips for Safe Storage and Proper Disposal: Starting fluid should be stored in its original container, tightly closed, in a cool, dry, well-ventilated area, away from heat sources and open flames. Never store it in an engine compartment. Always dispose of starting fluid and its empty containers in accordance with local, state, and federal regulations.

Embracing lawn mower maintenance isn't just about having a well-functioning machine; it's about understanding and respecting the tools that help us keep our homes and gardens looking their best. By learning how to use starting fluid safely and effectively, you're taking a proactive step in maintaining your lawn mower's longevity and performance. Happy mowing!

AD