how to use arrow rivet tool

Mastering Arrow Rivets: How-To Guide with Rivet Tool

By Robert Clark
AD

Arrow rivets are a secure and efficient way to join two pieces of material without penetration from the other side. To achieve this, you'll need an arrow rivet tool, also known as a pop rivet tool or a blind rivet tool. This article will guide you through the process of using an arrow rivet tool, ensuring a tight, permanent joint.

Before we dive into the process, let's ensure you have the right tools and materials. You'll need an arrow rivet tool, of course, along with arrow rivets, a rivet sets, and a suitable bit for your drill. We'll also assume you're working with sheet metal, but the process is similar for other materials like plastic or wood.

Understanding Arrow Rivets and the Riveting Process

Arrow rivets are formed by pulling one end of the rivet through a hole in the material and using the tool to pull the other end into a bullet-shaped head, hence the name 'arrow'. This process, known as riveting, provides a strong, permanent joint. It's often used in sheet metal work, aerospace, and automotive industries, and many DIY enthusiasts find it handy for various projects around the home or workshop.

AD
Riveting - Arrow Tool Group
Riveting - Arrow Tool Group
Unusual Uses for Pop Rivets
Unusual Uses for Pop Rivets
How To: Remove Rivets
How To: Remove Rivets

Riveting is a cold working process, meaning it doesn't involve heat. Instead, it relies on mechanical interlocking to create a powerful bond. Let's explore the process step-by-step.

Preparation: Drill and Deburr Holes

Before you begin, drill holes in both pieces of material where you want the rivet to be placed. The holes should be slightly smaller than the rivet's body, so the rivet has something to grip onto. Use a drill bit slightly smaller than the rivet's body diameter.

Arrow RHT300 One-Handed Swivel Rivet Tool - Arrow Tool Group
Arrow RHT300 One-Handed Swivel Rivet Tool - Arrow Tool Group
How-To: Install Metal Rivets - Make:
How-To: Install Metal Rivets - Make:

Next, deburr the holes. This step removes any sharp edges or burrs from the drilling process, preventing damage to the rivet and ensuring a smooth joint. You can use a deburring tool,.File, or a dremel to achieve this.

Setting Up the Rivet

Insert an arrow rivet into the tool's mandrel, ensuring the head is facing the right way. The head should be on the same side as the tool's trigger or handle, so it can be pulled into the mandrel when you squeeze the trigger.

AD

Insert the mandrel with the rivet into the drilled hole from the Access side (the side where you'll see the rivet head after riveting). Push it until the rivet's head is flush with the material's surface.

Riveting: Pulling the Rivet

Now that everything is set up, it's time to pull the rivet. This is the crucial step where you use the arrow rivet tool to form the rivet head, creating the strong joint.

Hold the tool securely with one hand, applying slight downward pressure. With your other hand, squeeze the trigger gently but firmly. The tool will pull the rivet's tail through the material, and the mandrel will form the head on the other side.

AD

Monitoring the Rivet's Progress

As you pull the rivet, you should see the head forming on the other side. If you're riveting from the underside, you might need to use a mirror or a camera to check the rivet's progress.

Be careful not to pull too hard or too quickly. The goal is to form a nice, smooth head, not to tear the rivet or pull it completely through the material.

Finishing Up

Once the rivet is fully set and you have a nice bullet-shaped head, release the trigger and remove the tool. If you're satisfied with the rivet, that's it! If you're not, you can use a rivet setter to squeeze the head down to a more uniform shape.

AD

For multiple rivets, simply repeat the process. Remember to keep your work area clean and organized to prevent damaging the rivets or the tool.

Troubleshooting Common Issues

Occasionally, you might encounter issues while riveting. Here are a few common problems and their solutions:

Rivet Won't Pull: If the rivet won't pull, double-check that you have the right tool for the job. Also, ensure you're using the right size rivet and that the holes are the correct size.

Rivet Pulls Through: If the rivet pulls through, you might be using a rivet that's too long or the hole might be too big. Always use rivets that are slightly shorter than the material's thickness and holes that are slightly smaller than the rivet's body.

Rivet Head is Gouged: If the rivet head is gouged, you might be pulling the rivet too quickly or with too much force. Take your time and apply a steady, even pressure.

Always remember that practice makes perfect. Don't get discouraged if your first few rivets aren't perfect. With time and practice, you'll get the hang of it.

That's it! With these steps, you're well on your way to becoming a riveting expert. So, what are you waiting for? Grab your arrow rivet tool and start joining materials like a pro!

AD