How to Use a Toilet Auger: Step-by-Step Guide on YouTube
Tackling clogs in your toilet might seem like a daunting task, but with the right tools and a little know-how, you can resolve the issue yourself. One such tool is a toilet auger, also known as a closet auger. This plumbing snake is specifically designed to clear obstructions in toilets and shower drains. Youtube is a treasure trove of visual guides that can walk you through the process. Let's explore how to use a toilet auger safely and effectively.
Before we dive in, remember that plungers are often the first line of defense against toilet clogs. If your toilet is clogged but not completely blocked, try plunging it a few times. If water still doesn't drain, or the toilet is completely blocked, it's time to break out the auger.
Understanding Your Toilet Auger
A toilet auger consists of a long, flexible cable with a coiled metal end (the auger), which is housed inside a plastic drum. The cable is pushed through the hole at the bottom of the toilet, allowing you to reach and break up blockages. Familiarizing yourself with these components ensures a smoother unclogging process.
It's crucial to note that toilet augers are designed for one-time use due to the potential for contamination. Always use a new auger for each job to prevent the spread of bacteria and maintain safe practices.
Preparation and Safety Precautions
Before starting, make sure to put on gloves and eye protection. Clogs often release unpleasant substances, so it's essential to protect yourself. Additionally, spread a towel or blanket around the toilet to catch any water that might spill over.
Place the bucket of the auger over the toilet drain, and insert the cable through the hole. The auger's drum should rest securely on the toilet seat, allowing you to feed the cable down as needed.
Feeding the Cable and Breaking Up the Clog
Turn the drum's handle clockwise to feed the cable into the pipe, keeping a steady and gentle pressure. As the cable extends, it will bend around the pipe's curvature. Keep feeding the cable until you feel resistance, indicating you've reached the blockage.
Gently push and twist the cable to break up the clog. Be patient and apply steady pressure. If you feel too much resistance, reap the cable slightly and try again. Once the clog is broken up, slowly retrieve the cable by turning the drum's handle counterclockwise.
Checking for Complete Clearance
After retrieving the cable, flush the toilet to test if the clog has been completely cleared. If water drains freely, congratulations! You've successfully unclogged your toilet using an auger. If water still doesn't drain, you might need to repeat the process or consult a professional plumber.
Even if water drains, it's a good idea to flush a few more times to ensure the pipes are completely clear. This will prevent any lingering debris from potentially causing another clog in the future.
Cleaning Up and Disposing of the Auger
Remove the toilet auger and dispose of it immediately, following your local guidelines for hazardous waste disposal. Remember that augers are designed for one-time use and can harbor bacteria.
Clean the area around the toilet, being sure to wipe down any surfaces that came into contact with water from the clog. Wash your hands thoroughly to ensure you've removed any potential contaminants.
Learning how to use a toilet auger effectively can save you from costly plumbing calls. With practice, you'll be tackling minor toilet clogs like a pro. However, if you encounter severe or recurring issues, don't hesitate to call a licensed plumber. They have the training and tools needed to address more complex problems safely and effectively.