how to use a harbor freight tire changer

Mastering Your Harbor Freight Tire Changer: Step-by-Step Guide

By Laura Garcia
AD

When it comes to maintaining your vehicle, one of the essential tools you'll need is a tire changer. If you're the DIY type, you might have invested in a quality tire changer from Harbor Freight. Here's a comprehensive guide on how to use your Harbor Freight tire changer safely and effectively.

Before we dive into the process, it's crucial to note that safety should always be your top priority when working with any automotive tool. Ensure you're wearing appropriate clothing and gloves, and have a secure and well-lit workspace. Now, let's get started.

Understanding Your Harbor Freight Tire Changer

First, familiarize yourself with your Harbor Freight tire changer. The most common models are the professional-grade BendPak XPR-10AS-LP and the cost-effective Black impose 3500. Both are durable and efficient, but they have some differences in operation.

AD
How to Use a Manual Tire Changer - By Harbor Freight
How to Use a Manual Tire Changer - By Harbor Freight
how to use a diy tire changer Archives - BangShift.com
how to use a diy tire changer Archives - BangShift.com
Install tire on rim using Harbor Freight tire changer with Lucid adapter
Install tire on rim using Harbor Freight tire changer with Lucid adapter

Regardless of the model, your tire changer has several key components: the turntable for holding the tire, the swingarm for removing and installing tires, the power source (either electric or air), and various pressure gauges and levers.

Setting Up Your Tire Changer

Before you begin, ensure your tire changer is secure and stable. If you're using a portable model, make sure it's properly fastened to the ground. For floor models, ensure the area around the machine is clear of obstructions.

Yes, Harbor Freight Does Sell A Mini-Tire Changer (And Here's How It Works) - SlashGear
Yes, Harbor Freight Does Sell A Mini-Tire Changer (And Here's How It Works) - SlashGear
Manual Tyre Changer
Manual Tyre Changer

Always follow the manufacturer's instructions for set-up. Generally, you'll need to attach the mountain adapter to the turntable, which will hold the tire rim securely in place.

Preparing Your Vehicle and Tire

Before removing the tire, block the opposite wheel to prevent the vehicle from rolling. Loosen the lug nuts with a wrench, but do not remove them completely._frames concordance_class

AD

Use a tire iron to pry the tire off the rim. You might need to use a penetrating oil to break the seal between the tire and the rim. Once the bead breaks, the tire should be easy to remove.

Using the Tire Changer to Remove a Tire

Now that your vehicle and tire are ready, it's time to use your Harbor Freight tire changer. The process is essentially the same for both electric and air-powered models.

Start by placing the tire rim onto the turntable, with the valve stem pointing downwards. Secure the rim with the mountain adapter, ensuring it's tight but not overly so. This will prevent damage to the rim.

AD

Mounting the Tire onto the Swingarm

Position the swingarm over the tire and lower it until it's resting on the tire's bead. The tire should be centerd between the two arms of the swingarm.

Tighten the arm's clamps to hold the tire securely. Be careful not to overtighten, as this can damage the rim.

Dismounting the Tire from the Rim

Loosen the tire's bead by using the bead-breaker tool at the base of the machine. Position the tool over the tire's edge and pump the lever until the bead releases. You might need to do this on both sides of the tire.

AD

Once the bead is loose, raise the swingarm and turn the tire until it clears the rim. Lower the swingarm carefully to remove the tire from the rim.

Reinstalling a New Tire

Reinstalling a tire is essentially the reverse process of removing one. Before you start, ensure your new tire is the correct size and type for your vehicle. Also, ensure the rim is clean and free of any debris or old tire remnants.

Start by positioning the tire onto the rim, ensuring the tread is facing the right way up. Use your hands to press the tire onto the rim, working your way around the tire.

Mounting the Tire and Rim onto the Tire Changer

Mount the tire and rim onto the turntable, with the valve stem pointing downwards. Secure with the mountain adapter.

Mount the tire onto the swingarm, ensuring it's centerd. Tighten the clamps gently.

Installing the Tire onto the Rim

Using the swingarm, lower the tire onto the rim. The tire should easily slide onto the rim. If the tire resists, stop immediately and check that you've fully loosened the bead.

Once the tire is fully mounted, use the tire Iron to press the bead firmly onto the rim. Work your way around the tire, ensuring it's seated evenly.

Always check your work before driving away. Inflate the tire to the correct pressure and check for any leaks or damage. Using your Harbor Freight tire changer correctly will make this process quick and easy.

AD