how to use a grabit screw extractor

How to Use a Grabit Screw Extractor

By Hannah Anderson
AD

Got a stripped screw threatening to ruin your DIY project or hardware repair? Before you lose hope and reach for the drill, consider digging out your Grabit Screw Extractor. This ingenious tool is designed to remove broken screws like a breeze. Let's dive into how to use it efficiently and safely.

The Grabit Screw Extractor is a lifesaver for any handyperson's toolbox. With its unique design and clever mechanism, it can grip and extract screws that are stripped, rounded, or cross-threaded. Whether you're dealing with Phillips, flathead, or Allen screws, the Grabit has got you covered.

Understanding the Grabit Screw Extractor

The Grabit Screw Extractor is comprised of a robust handle, a unique collet system, and a set of interchangeable jaws. The jaws come in various sizes and types to accommodate different screw heads. Understanding how these components work together is key to successful extraction.

AD
How to Use? | Bolt and Screw Extractors
How to Use? | Bolt and Screw Extractors
a person holding a screw in their left hand and pointing it at the other side
a person holding a screw in their left hand and pointing it at the other side
How to Use a Screw Extractor | Remove snapped off bolt from engine
How to Use a Screw Extractor | Remove snapped off bolt from engine

The collet system, located at the base of the jaws, expands and contracts when you twist the handle. When you turn the handle clockwise, the collet opens, allowing you to insert or remove the jaws. When you turn it counterclockwise, the collet closes, securing the jaws and gripping the screw head.

Selecting the Right Jaws

Before you begin extraction, choose the jaw size and type that matches your screw head. The Grabit set includes various jaws, such as Phillips, flathead, and Allen, as well as Titanium and socket sizes. Start with the jaw size that's slightly bigger than the screw head for a secure grip.

How to Loosen a Stuck Phillips Screw
How to Loosen a Stuck Phillips Screw
four different views of the inside of a metal structure with holes and screws in it
four different views of the inside of a metal structure with holes and screws in it

If the initial jaw size doesn't provide a firm grip, try a smaller size. If the screw head is too damaged or too small, consider using a universal jaw or a burr to grind a grip onto the screw's shank.

Inserting and Securing the Jaws

To insert the jaws, loosen the collet by turning the handle counterclockwise until the collet is fully open. Gently insert the jaw until the base of the jaws rests against the collet. Tighten the collet by turning the handle clockwise until it's snug. Ensure the jaw is secure and won't move around during extraction.

AD

If you're using a burr to create a grip, attach it to the jaw before securing it in the collet. Grind gently onto the screw's shank until you've created a suitable grip. Be cautious not to grind too much and damage the screw further.

Extracting the Stripped Screw

Once you've chosen and secured the right jaws, you're ready to begin extraction.

Center the Grabit over the stripped screw, ensuring the jaws align with the screw head. Apply steady pressure while turning the handle counterclockwise. The Grabit's unique collet system will transmit the turning force to the jaws, gripping and unscrewing the strip screw.

AD

Applying and Maintaining Pressure

Applying consistent and even pressure throughout the extraction process is crucial. The Grabit's handle is designed to provide a comfortable grip, allowing you to maintain pressure while turning. If you experience excessive resistance, stop immediately to avoid stripping the screw further or damaging the Grabit.

Push-pull actions during extraction can help maintain a steady grip and prevent slippage. If the screw isn't budging, try a different jaw size or type, or use a burr to create a better grip.

Taking Care of Your Grabit Screw Extractor

Proper maintenance ensures your Grabit Screw Extractor remains in top condition, ready to tackle any stripped screw challenge. After each use, clean the jaws and collet area with a cloth or brush to remove any debris or residue.

AD

Store your Grabit in a dry place, and never leave it exposed to harsh chemicals or extreme temperatures. Regularly check the jaws and handle for any signs of wear. Replace parts as necessary to maintain the Grabit's effectiveness and safety.

With a little practice and the right technique, the Grabit Screw Extractor can save you from many a sticky screw situation. So the next time you're staring at a stripped screw, don't give up – grab your Grabit and get extracting!

AD