how to use a bias binding foot

Mastering Bias Binding Foot: An Essential Guide

By Robert Lopez
AD

Are you struggling to tack on bias binding with precision? The bias binding foot is your secret weapon, and this guide will demystify how to use it. Let's dive right in.

Before we get started, ensure you have the right equipment: your sewing machine, a bias binding foot, and, of course, your fabric and bias-binding tape. The bias binding foot is typically compatible with most standard sewing machine types, but always double-check your model's specifications.

Understanding the Bias Binding Foot

The bias binding foot is designed with a notched tip that clears the way for your bias-binding tape. It allows for a smooth feed, ensuring both your binding tape and your main fabric move through your sewing machine evenly and without buckling.

AD
Bias Binder Foot | Sewing Accessory - The Sewing Loft
Bias Binder Foot | Sewing Accessory - The Sewing Loft
instructions on how to use the sewing machine
instructions on how to use the sewing machine
How to use a binding foot
How to use a binding foot

Take a closer look at the foot's tip; you'll notice it's slightly curved. This design feature helps prevent the binding tape from getting pushed to the side, keeping it centered and creating a clean, precise finish.

Getting Started with the Bias Binding Foot

Before you start sewing, there's some preparation needed to ensure a smooth process.

How to use a binding/bias tape presser foot #presserfoot #singerheavyduty
How to use a binding/bias tape presser foot #presserfoot #singerheavyduty
How To Use A Binding Foot | Sewing Bee Fabrics
How To Use A Binding Foot | Sewing Bee Fabrics

Attachment

Attach your bias binding foot to your sewing machine exactly like you would attach any other presser foot.

First, lower the presser foot lever to raise the presser foot. Use a flathead screwdriver to gently pry the retainer from the shank. Once the retainer is released, you can slide the foot off. To attach the bias binding foot, align the shank with the slot on the inside of the foot, then slide it down until it's secure.

AD

Threading

Thread your sewing machine with the same tension as you would for normal sewing. Remember, the bias binding foot doesn't require a different type of thread or tension setting.

There's no need to adjust the tension even if you're using a thinner or thicker binding tape. The foot takes care of ensuring smooth feeding, so your thread can focus on creating beautiful, even stitches.

Sewing with the Bias Binding Foot

Now that your machine is all set up, let's tackle the main event - sewing your bias binding.

AD

To begin, position your fabric under the foot, with the raw edge of your binding aligned with the notched tip. This ensures your binding stays centered as you feed your fabric through.

Sewing the Binding on Straight Edges

When sewing along straight edges, maintain a steady, even speed as you feed your fabric through your machine. Do not overlap your stitches at the ends - instead, finish with a few stitches on the edge, then turn your fabric and start again from the other side.

Tip: To avoid issues at corners, leave a bit of extra binding when you start at a corner. You can trim this excess once you've finished sewing.

AD

Sewing the Binding on Curved Edges

Sewing curves can be a bit trickier, but with the bias binding foot, it's perfectly doable. Again, keep your speed steady and even. For especially sharp curves, you might need to adjust your speed and take small, careful steps.

Tip: If you're struggling with sharp curves, consider clipping the seam allowance at the outer curve first. This can help you maintain a smooth, even stitch line.

Wrapping up, the bias binding foot might seem like a small accessory, but it's a game-changer when it comes to clean, perfectly managed bias binding. So, go ahead - let your creativity flow, and enjoy sewing your bias binding with newfound precision and ease.

AD