how to update forscan

Step-by-Step: How to Update ForScan

By Andrew Brown
AD

Updating your vehicle's software need not be a daunting task. For owners of Ford vehicles equipped with the FordPass Connect system, updating your Fordscan module can enhance your driving experience, ensuring you're always running on the latest and most secure software. Here's a step-by-step guide on how to update your Fordscan module, including required tools and common issues you might face.

Before we dive in, ensure your vehicle's 12V battery is in good condition and the ignition is off. Also, gather the following tools:

Understanding the ForScan Tool

The ForScan tool is an open-source vehicle diagnostics and programming system designed for Ford and Lincoln vehicles. It's widely used due to its versatility and user-friendly interface. Understanding the basics of the ForScan tool will help you navigate through the update process smoothly.

AD
How to Refinish Veneer
How to Refinish Veneer
How to Remove Old RV Decals
How to Remove Old RV Decals
How to Update a Tuscan Living Room - Before and After
How to Update a Tuscan Living Room - Before and After

ForScan is available in two versions - ForScan Mobile (a standalone device) and ForScan for PC (a software application). This guide will focus on the ForScan for PC version as it's more accessible and commonly used.

System Requirements and Download

Before you proceed, ensure your PC meets the following minimum requirements:

15 Secrets to Fix an Old iPad That Won't Update
15 Secrets to Fix an Old iPad That Won't Update
a person in blue gloves is cleaning an old cabinet door with a brush and sponge
a person in blue gloves is cleaning an old cabinet door with a brush and sponge
  • Windows XP or later
  • 250 MB free space on your hard drive
  • USB cable (Original OBD-II cable or Elm327 interface)

Installing and Launching ForScan

Download the ForScan software from the official website. Double-click the downloaded executable file to install ForScan on your PC. Once installed, launch the application. You'll see the main user interface, where you can connect your vehicle and begin diagnostics.

Locating Your Fordscan Module

Before you proceed with the update, it's crucial to locate your vehicle's Fordscan module. The module, usually plugged into an OBD-II port, might be tucked under the dashboard or near the driver's side footwell. Consult your vehicle's owner's manual for the exact location if needed.

AD

Once you've located the module, disconnect it from the OBD-II port. Be careful not to damage any internal components, and ensure you keep track of the plug's polarity to connect it back correctly.

Preparing the Update File

Before you can update your Fordscan module, you'll need to acquire the correct update file. Visit the appropriate Ford forums or websites dedicated to your vehicle model and year. Download the latest update file (.bin) for your specific Fordscan module. Save the file to an easily accessible location on your PC.

Updating the Fordscan Module

Now that you have the update file, follow these steps to update your Fordscan module:

AD
  1. Launch ForScan on your PC.
  2. Connect the Fordscan module to your PC using your USB cable or Elm327 interface.
  3. In the ForScan interface, select your vehicle's make, model, and year from the respective dropdown menus.
  4. Click on the 'Programming' tab in the main menu.
  5. Find the 'PCM' (Powertrain Control Module) listing, and click on it to expand its submenus.
  6. Locate the 'Update' option under the 'PCM' listing, and click on it.
  7. In the 'Update PCM' window, click on the '...' (Browse) button next to the 'File name' field.
  8. Navigate to the location where you saved the update file, select the file, and click 'Open'.
  9. Review the update information displayed on the screen, and click 'Accept' if you're satisfied.
  10. Click on the 'Update' button to begin the updating process. This may take a few minutes, so be patient and do not interrupt the process.

Post-Update Verification and Troubleshooting

Once the update process is complete, you'll need to verify that the update was successful and troubleshoot any potential issues. Here's how to do that:

Verifying the Update

ForScan will display a message indicating whether the update was successful, or if any errors occurred. If the update was successful, you can proceed to the next step. If not, double-check your process and try again, ensuring you've used the correct update file for your specific Fordscan module.

Common Issues and Troubleshooting

If you encounter any issues during the update process, try the following troubleshooting steps:

AD
  • Check your USB cable or Elm327 interface for any signs of damage. Replace it if necessary.
  • Ensure your PC meets the minimum system requirements for running ForScan.
  • Re-locate and re-connect the Fordscan module, ensuring it's correctly inserted into the OBD-II port.
  • Disconnect all other USB devices from your PC to minimize potential interference during the update process.
  • If all else fails, consult the official ForScan community or Ford forums for further assistance and guidance.

Updating your vehicle's Fordscan module may seem daunting at first, but following these steps ensures a smooth and successful process. Always remember to double-check the compatibility of the update file with your specific vehicle model and year. Happy driving, and enjoy the enhanced features that come with the latest software updates!

AD