how to unpair a fire tv remote

Unpair Fire TV Remote: Step-by-Step Guide

By Thomas Martinez
AD

Are you tired of your Amazon Fire TV constantly changing inputs due to interference from other remotes? It might be time to unpair your Fire TV remote from the devices it's connected to. Unpairing your remote can help improve its functionality and prevent unwanted input changes. Here's how to do it easily.

Before you start, make sure your Fire TV and its remote are both powered on. This will ensure a smooth unpairing process. Also, this guide assumes you're using an Amazon Fire TV remote that came with your device, not a generic remote.

Unpairing Your Fire TV Remote

Unpairing your remote involves removing it from the list of paired devices in your Fire TV's settings. This will delete any prior pairing information and allow you to pair it again if needed.

AD
How to reset an Amazon Fire TV remote in less than 2 minutes
How to reset an Amazon Fire TV remote in less than 2 minutes
How to reset your Amazon Fire TV Remote #shorts
How to reset your Amazon Fire TV Remote #shorts
How to Open Fire TV Remote Reviewed
How to Open Fire TV Remote Reviewed

Remember, unpairing your remote doesn't affect any other paired devices. It only removes the selected device from your Fire TV's memory.

Accessing Your Fire TV Settings

To unpair your remote, you'll first need to access your Fire TV's settings. Here's how:

an image of a black remote control with the words hold together on it's side
an image of a black remote control with the words hold together on it's side
5 Ways to Use Fire TV Stick if Your Remote Is Lost
5 Ways to Use Fire TV Stick if Your Remote Is Lost

Navigate to "Settings" on your Fire TV home screen. It's usually at the top of the screen. Once in settings, select "Controllers and Bluetooth Devices".

Removing Your Remote from Paired Devices

Now, you're ready to unpair your remote.

AD

Select "Amazon Fire TV Remotes" on the screen. Here, you'll see a list of all paired remotes. Choose the remote you want to unpair. Select "Unpair" to confirm.

Your remote will now be removed from the list of paired devices. If you want to pair it again later, you can do so by following the pairing process in your Fire TV's instructions.

Forgetting the Paired Device on Your Remote

After unpairing your remote from your Fire TV, you might want to remove the pairing information from your remote as well. This can help prevent interference from other devices. Here's how:

AD

On your remote, press and hold the "Home" button for about 10 seconds. This will turn off the remote, forgetting any paired devices. After a few seconds, the remote will turn on again, ready for a new pairing.

Remember, this will delete all paired information from your remote, not just the Fire TV. It's a good idea to forget all paired devices if you're planning to pair your remote with a new Fire TV.

Pairing Your Remote with a New Device

If you want to pair your remote with a new device after unpairing, it's a straightforward process.

AD

First, make sure your new device is powered on and in pairing mode. Then, hold down the "Home" and "Back" buttons on your remote simultaneously for about 5-10 seconds until the LED light at the top of the remote starts blinking. Once it's blinking, your remote is in pairing mode and ready to connect to your new device.

AD