how to unhook a gooseneck trailer

Simple Steps to Disconnect a Gooseneck Trailer

By Daniel Thomas
AD

Unhooking a gooseneck trailer from your pickup truck can be a daunting task, but it doesn't have to be. With the right technique and a bit of know-how, you can safely detach your trailer and be on your way. In this guide, we'll walk you through the process step-by-step, ensuring you're well-equipped to tackle this task with confidence.

Before we dive into the details, there are a few safety precautions you should keep in mind. Firstly, ensure your truck is parked on a level surface. This will make the unhooking process much smoother and safer. Secondly, engage your truck's parking brake and place wheel chocks behind the tires to prevent any unwanted movement. Lastly, disengage the trailer's emergency brake and make sure all the trailer's lights are off to avoid any electrical shorts.

Preparing Your Truck and Trailer

Before you start, ensure your truck and trailer are ready for the separation. Begin by disengaging the fifth wheel hitch by lowering the releasing lever located at the front of the hitch. This will release the latch that holds the trailer kingpin in place.

AD
How to hook up a gooseneck trailer
How to hook up a gooseneck trailer
How To Hook Up A Gooseneck Trailer | Junkyard Mob
How To Hook Up A Gooseneck Trailer | Junkyard Mob
EZE-Latch The EZE Way
EZE-Latch The EZE Way

Next, lower your truck's tailgate to provide more space and make it easier to access the gooseneck trailer. If your trailer has stabilizers or scissor jacks, raise them to level the trailer and make the unhooking process smoother.

Disconnecting the Electrical Connections

Safety first! Before physically disconnecting anything, ensure you've turned off and unplugged all electrical appliances in the trailer. Then, locate the electrical connector (usually at the front of the trailer), and carefully unplug it from the truck. Remember to avoid pulling on the wires; instead, use the connector's release mechanism to detach it.

How to Set Up and Use a Gooseneck Trailer Hook-Up Helper | Jeffers Pet
How to Set Up and Use a Gooseneck Trailer Hook-Up Helper | Jeffers Pet
3 Key Measurements Are a Must
3 Key Measurements Are a Must

To prevent any damage or confusion later, keep track of where the wires go and label them if necessary. It's also a good idea to use a protective cover to keep the connector clean and dry when not in use.

Detaching the Safety Chains

After disconnecting the electrical wires, it's time to detach the safety chains. Although they are called 'safety' chains, they are actually used to secure the trailer to the truck when the kingpin is already safely in the fifth wheel hitch. They are not meant to support the weight of the trailer but rather guide it and prevent it from swinging uncontrollably during turns.

AD

To detach the chains, you'll need to adjust them to their loosest position and unhook them from the trailer. Do this by pulling the chain towards the hook, releasing the latch, and then gently pulling the chain away. Once detached, let the chains hang downwards to avoid damaging anything.

Lifting and Disconnecting the Kingpin

Now that you've prepared both your truck and trailer, it's time to lift and disconnect the kingpin. This requires a bit of strength and careful maneuvering, so take your time and ensure you have a good footing.

If you have a helper, have them stand behind the kingpin and lift it up while you guide the kingpin into the fifth wheel hitch. If you're working alone, you may need to use a lift or jack to safely and steadily raise the kingpin. Remember to engage the trailer's parking brake to keep it stable during this process.

AD

Lowering and Aligning the Kingpin

Once you've raised the kingpin, slowly lower it onto the fifth wheel hitch, ensuring it's perfectly aligned. The kingpin should easily slide into the hitch with minimal resistance. If you feel the kingpin catching or not going in smoothly, go back up and try again.

As you lower the kingpin, you should hear a distinctive 'clunk' as it latches into place. Once you hear this sound, the kingpin has successfully locked into the fifth wheel hitch. Double-check that the latch is secured, and you're ready to disengage your truck's parking brake and drive away.

Purging the Fifth Wheel Lubricator

After unhooking the trailer, it's a good practice to purge the fifth wheel lubricator. This will remove any residual lubricant and prevent it from drying out, ensuring it's ready for the next use.

AD

To purge the lubricator, simply lift the lever and allow the lubricant to drain out. Wipe the area clean with a rag, and you're good to go. This step is crucial for maintaining the longevity and performance of your fifth wheel hitch.

And there you have it! Unhooking a gooseneck trailer can be a breeze once you know what you're doing. Always remember to prioritize safety and double-check that everything is properly detached and secured before driving away. Happy trailering!

AD