how to unclog a bathtub with a snake

Unclog Your Bathtub with a Snake: Step-by-Step Guide

By Melissa Thompson
AD

Is your bathtub draining at a snail's pace, or worse, not at all? It's likely that your bathtub drain is clogged. But don't reach for the harsh chemicals or call a plumber just yet. Before you do, let's try unclogging it with a simple, eco-friendly, and often overlooked tool - a drain snake. This method is safe, effective, and can save you both money and time.

Unclogging a bathtub drain with a snake might seem intimidating, but don't worry, it's quite easy once you get the hang of it. In this guide, we'll walk you through the process step-by-step, ensuring your bathtub drains like new again.

Understanding Your Drain Snake

First, let's get to know your drain snake. Also known as a plumber's snake, it's essentially a flexible auger designed to clear clogs from drains. The most common type is a manual snake, which consists of a long, spring-like wire with a crank at one end. The other end has a coil that, when unwound, can reach deep into your drain.

AD
How To Unclog A Bathroom Tub Effectively
How To Unclog A Bathroom Tub Effectively
How to Snake Out a Bath Tub
How to Snake Out a Bath Tub
How To Unclog a Shower Drain in Just 5 Minutes
How To Unclog a Shower Drain in Just 5 Minutes

For bathtub drains, which usually have an L-shaped trap under the tub, a snake with a length of 25 to 50 feet is typically sufficient. If your snake is retractable, make sure the coil is fully unwound before you start. If it's not, you can usually attach and detach sections as needed.

Preparing to Snake Your Bathtub Drain

Before you start, gather your tools. Apart from the drain snake, you'll also need a bucket, rubber gloves, a screwdriver (in case you need to remove the drain cover), and old towels or rags to protect your surfaces.

there is a white bathtub with a faucet in it
there is a white bathtub with a faucet in it
How to Use a Drain Snake for a Toilet, Sink, or Shower - Bathroom Maintenance Tips from TubShroom
How to Use a Drain Snake for a Toilet, Sink, or Shower - Bathroom Maintenance Tips from TubShroom

randomizationOf The Toilet

Start by filling the bucket with hot water. You'll use this to test your progress and to help dislodge any loosened debris. Also, fill your bathtub about halfway with hot water. The water should be as hot as you can comfortably handle - hot water helps to break down grease and grime.

Next, put on your gloves to protect your hands. Then, clear the drain area of any obstacles. If your bathtub has a pop-up drain, remove the plug to make the process easier. If your drain has a cover, you may need to remove it using the screwdriver. Be careful not to lose any small parts.

AD

Prepare The Snake

Now, prepare your snake. If it's not already extended, unwind it fully. You should see the coil at the end start to expand. This is what you'll use to reach into the drain.

If your drain snake has a auger bit at the end, leave it as is. The auger bit is designed to grab and pull out clogs. If your snake doesn't have one, you can purchase an auger bit attachment separately and screw it onto the end of the wire.

Snaking Your Bathtub Drain

Now, you're ready to start snaking. Begin by placing the end of the snake into the bathtub drain. Slowly start turning the crank clockwise. This will cause the wire to feed into the drain, following the bend in the trap.

AD

Feeling The Clog

Keep feeding the snake until you feel resistance. This could be the clog, or it could be the bend in the trap. If it's the bend, you might need to add sections to your snake. Once you're sure you've reached the clog, start turning the crank counterclockwise. This will cause the auger bit to screw into the clog, grabbing it.

Once you've grabbed the clog, slowly start pulling the snake back out. You should feel the clog start to come loose. If it doesn't, keep turning the crank counterclockwise and pulling, using a gentle but firm pressure. If the clog is stubborn, you might need to repeat this process a few times.

Removing The Clog

Eventually, you should feel the clog start to give way. Once it does, continue pulling the snake out of the drain until the clog is completely removed. If the clog is large, it might not come out in one piece. Don't worry, just keep pulling until it's all out.

AD

Once the clog is removed, use the bucket of hot water to test your drain. Pour it down the drain and watch if the water drains quickly and easily. If it does, your bathtub drain is unclogged! If not, you might need to repeat the process or try another method.

Cleaning Up

Congratulations, you've unclogged your bathtub drain using a snake! Now it's time to clean up. Remove any remaining debris from the drain and the area around it. Wipe down the drain and surrounding surfaces with a damp cloth to remove any remaining grime.

As for the snake, store it properly when you're done. Clean it thoroughly with soap and water to remove any lingering debris, then dry it and store it in a dry place. If your snake came with a storage bag or case, use that to keep it clean and tangle-free.

Preventing future clogs is just as important as unclogging them. Regularly maintain your bathtub drain by pouring a pot of boiling water down it once a week. This helps to break down any grease or soap scum that might be building up. You can also use a biodegradable drain cleaner or a mixture of hot water, vinegar, and baking soda to help keep your drains clear.

Unclogging a bathtub drain with a snake is a simple, effective, and eco-friendly way to maintain your plumbing. With a little patience and practice, you'll be handling clogs like a pro in no time. So the next time your bathtub's draining slow, don't reach for the harsh chemicals. Reach for your drain snake instead. Happy snaking!

AD