how to turn on shower head delta

"Activation Secrets: Switch On Your Delta Shower Head"

By Christopher Martin
AD

Ever found yourself standing in the shower, ready to start your day, only to realize the shower head isn't cooperating? If you have a Delta shower head, it's likely in need of a simple reset. Here's a comprehensive guide on how to turn on a shower head made by Delta.

Before we dive in, let's understand why this happens. Sometimes, water pressure fluctuations or air trapped in the pipe can cause the shower head to stop working. The good news is, you can often fix this with just a few simple steps.

Preparation: Understand Your Delta Shower Head

Delta offers a range of shower heads, and the process to turn them on may vary slightly depending on the model. The following steps are generally applicable to most Delta shower heads, but if you're unsure, always refer to your specific model's user manual.

AD
How to Remove Your Delta Shower Handle: A Complete Guide
How to Remove Your Delta Shower Handle: A Complete Guide
Easily Customize Your Shower
Easily Customize Your Shower
Delta Porter Shower Head Low Water Flow Pressure - Remove Restrictor to Increase Water Flow
Delta Porter Shower Head Low Water Flow Pressure - Remove Restrictor to Increase Water Flow

For instance, if you have a Delta RP13220, which is a single-function shower head, the process is slightly different than for a Delta Linneo D2C0542, which is a two-function (fog-free and mist) shower head.

Check Your Shower Valve

Before you start, make sure your shower valve is fully open. Sometimes, the issue isn't with the shower head itself, but with the valve. If the valve is fully open and the shower head still isn't working, proceed to the next step.

a shower head with the words how to install a hand held showerhead
a shower head with the words how to install a hand held showerhead
Fixing a Stuck Delta Shower Cartridge: DIY Techniques - Regain Control of Your Shower!
Fixing a Stuck Delta Shower Cartridge: DIY Techniques - Regain Control of Your Shower!

If the valve is faulty, however, it might be time to call a professional plumber. Safety first, always!

Locate the Flow Restrictor

The flow restrictor is a small, circular piece of plastic that controls water flow to meet federal water efficiency standards. It's often located inside the shaft of the shower head. If the flow restrictor gets dislodged or blocked, it can cause water flow issues.

AD

To locate it, you might need to disassemble the shower head. Once you find the flow restrictor, carefully remove it and clean it. If it's clean but still causing issues, try removing it altogether. However, keep in mind that removing the flow restrictor may increase water usage.

Turning On Your Delta Shower Head: Standard Method

If your shower head isn't turning on and you've confirmed the shower valve is fully open and the flow restrictor isn't the issue, it might be due to air trapped in the pipe. Here's how to relieve that air pressure:

Step 1: Isolate the Shower

First, turn off the main water supply to your shower. The water supply valves are usually located near the shower, but if you can't find them, you might need to check your home's blueprints or call a plumber.

AD

Once the water is off, turn on the shower head to relieve any remaining water pressure.

Step 2: Turn On the Water Again

After a few minutes, turn the water back on slowly. The air should flow out, and your shower head should start working again.

If this doesn't work, or if the problem persists, it's a good idea to call a professional. The issue could be more complex, or there might be a problem with your shower head itself.

AD

Keeping your Delta shower head in good working order is all about regular maintenance. If you're experiencing issues, remember to check the water valve, the flow restrictor, and the main water supply before assuming the worst. Regularly cleaning your shower head and keeping it clear of debris can also prevent many issues from happening in the first place.

AD