how to turn on dji spark

"Easily activates: A Step-by-Step Guide to Turning On Your DJI Spark"

By Amanda Martin
AD

Tired of missing out on that perfect aerial shot? Want to start capturing stunning footage with your DJI Spark? Let's navigate through the simple steps to turn on your drone and start your adventure into the world of drone photography.

The DJI Spark is designed with simplicity and compactness in mind, making it easy to use even for first-time drone pilots. Before we dive into the step-by-step process, ensure you have a fully charged drone and remote control. Now let's proceed to turn on your DJI Spark.

Preparing Your DJI Spark

The first step involves checking your drone for any potential damage before every flight. This is a crucial safety precaution that should not be overlooked. Once you've confirmed everything is in good condition, let's move on to powering up your Spark.

AD
DJI Spark Beginners Guide - Get Ready to Fly!
DJI Spark Beginners Guide - Get Ready to Fly!
DJI Spark Beginners Guide - Get Ready to Fly!
DJI Spark Beginners Guide - Get Ready to Fly!
BEST SETTINGS for CINEMATIC FOOTAGE with the DJI SPARK
BEST SETTINGS for CINEMATIC FOOTAGE with the DJI SPARK

Before you power on your drone, remove any obstacles around it. Ensure there are no trees, buildings, or other structures within a 33 feet (10 meters) radius, as this is the maximum range for the controller without using a mobile device.

Checking the Battery Level

Before you turn on your DJI Spark, make sure the battery is fully charged. A full battery can provide up to 16 minutes of flight time, but it's always a good practice to have one extra battery with you. Use the Spark's battery status light to check the remaining power. Green means 50% or above, yellow suggests 20-50%, and red indicates below 20%.

How to Update the DJI Spark's Firmware with DJI Assistant 2
How to Update the DJI Spark's Firmware with DJI Assistant 2
DJI Spark Setup - 10 Steps : Before You Fly
DJI Spark Setup - 10 Steps : Before You Fly

If the battery level is low, charge it using the USB cable and the provided battery charger. Remember never to charge the battery directly in your drone. Also, always use DJI's official accessories for charging to prevent damaging your drone.

Powering Up the Remote Controller

The DJI Spark comes with a dedicated remote controller. Before you turn on your drone, ensure the remote control is powered on. The controller uses two 1800 mAh batteries, which can last for approximately 2.5 hours of flight time. Use the power button on the back of the controller to turn it on. You'll see the front lights start to blink while it connects to your drone.

AD

If it doesn't connect immediately, try re-inserting the batteries or turning off both the controller and the drone, then re-attempt the connection. Also, ensure there are no physical obstacles between the drone and the controller.

Powering Up Your DJI Spark

With everything else ready, it's time to power up your DJI Spark. Remember that the drone and the controller should only be turned on in an open area, clear of obstacles, to prevent any potential accidents.

First, uncap the camera on the front of your Spark. The drone will not power on with the lens cap attached. Now, press and hold the power button on the side of the drone for approximately three seconds. You'll hear a beep, and the Spark will give out a 'ding' sound, indicating it's powered on. The two front lights will also start blinking.

AD

Connecting to Your Mobile Device (Optional)

The DJI Go app can significantly enhance your Spark experience, allowing you to access advanced features like editing and sharing your footage. Before connecting, ensure you've downloaded and installed the DJI Go app on your mobile device. Once the drone is powered on, open the DJI Go app and follow the prompts to connect your mobile device to the Spark.

You'll be guided through the process of connecting the app to the remote controller and then to the drone. Once connected, you'll see a live video feed on your screen, and you're ready to take off. DJI recommends updating your app and firmware to ensure compatibility and access to all available features.

Calibrating Your DJI Spark

Before you fly your DJI Spark for the first time, you'll need to calibrate the compass. This ensures the drone's navigational accuracy and safety. To calibrate, situate the drone in an open area away from magnetic interference, like power lines or metal objects. Follow the on-screen instructions on your connected mobile device to complete the calibration process.

AD

Once the calibration is complete, you're ready to fly your DJI Spark. Follow the on-screen instructions in the DJI Go app for a safe and enjoyable flying experience. Always remember to keep your drone within your line of sight and stay aware of your surroundings.

Now that you're all set to fly, keep an eye out for no-fly zones and always respect local drone regulations. With a bit of practice, you'll soon be creating awe-inspiring aerial cinematography. Happy flying, and stay safe!

AD