Toyota Corolla: Easily Turn On Back Windshield Wiper
Ever found yourself in a sudden downpour while driving your Toyota Corolla, wishing you could activate your rear windshield wipers with just a simple click? While Toyota Corolla models come with automatic front wipers, the rear wipers are manually controlled. No need to worry, as we guide you through a simple process to turn on your back windshield wipers, ensuring clear visibility and a safer drive.
Before diving into the steps, make sure your Toyota Corolla is equipped with rear wipers. Not all models come with this feature, so a quick check of your vehicle's specifications can save you time. Once you've confirmed, let's proceed to turning on those wipers.
Understanding Your Toyota Corolla's Rear Wiper Switch
Your Corolla's rear wipers are controlled by a switch located on the driver's side, close to the steering wheel. It may blend in with other switches, so let's help you identify it.
The switch is typically labeled with an 'R' for 'Rear'. It might be a dial or a small lever, depending on your Corolla's model year and trim level. Familiarizing yourself with this switch will make turning on your rear wipers a breeze.
Identifying Your Rear Wiper Switch
As each Toyota Corolla model might have a slightly different dashboard layout, we'll provide examples for two common switch types:
- Dial-type switch: This switch is usually located near the top of the left side of your steering wheel. It's marked with an 'R' and may also have symbols representing different wiper speeds (intermittent, low, high).
- Lever-type switch: This switch, often found in older Corolla models, is usually positioned lower on the left side of your steering wheel. It might have a separate lever for turning the rear wipers on and off, and another lever or knob for controlling wiper speeds.
Finding the Rear Wiper Switch in Different Toyota Corolla Models
To help you locate the switch more accurately, we've included examples for some popular Toyota Corolla generations:
- 2014-2020 Toyota Corolla: In these models, you'll typically find a dial-type switch near the top of the left side of the steering wheel. Turning the dial clockwise increases the wiper speed, while turning it counter-clockwise adjusts the intermittent delay.
- 2020-Present Toyota Corolla: Some newer Corolla models have a more streamlined switch layout. The rear wiper switch might be integrated into the turn signal stalk, with a 'R' marking and possibly an 'AUTO' symbol for enabling auto-stop when the wipers are not in use.
Turning On Your Toyota Corolla's Rear Windshield Wipers
Now that you've identified the rear wiper switch, it's time to put it to use. Here's a simple, step-by-step process to turn on your Corolla's back windshield wipers.
For both dial-type and lever-type switches, follow these general steps:
Turning On the Rear Wipers
- Insert your key into the ignition and turn it to the ON or ACC position. This ensures your Corolla's electrical systems are powered on without starting the engine.
- Locate the rear wiper switch, as identified earlier. For dial-type switches, position the dial in the '1' or 'Low' position. For lever-type switches, move the lever to the 'Low' or '1' position.
- The rear wipers should now engage and begin clearing your back windshield. If they don't start moving, double-check that you've selected the correct position on the switch.
Adjusting Wiper Speeds and Intermittent Settings
To make the most of your Corolla's rear wipers, it's essential to understand how to adjust their speeds and intermittent settings. This will help maintain a clear windshield, even during light rain or when driving through areas with reduced visibility.
- Increasing wiper speed: For dial-type switches, turning the dial clockwise will increase the wiper speed. For lever-type switches, moving the lever to higher numbers or positions marked with faster speeds will achieve the same result.
- Adjusting intermittent settings: For dial-type switches, turning the dial counter-clockwise will increase the delay between wiper passes, allowing you to set an intermittent speed convenient for light rain. Some models may have specific markings for intermittent speeds, such as '4' or '2'. For lever-type switches, moving the lever to positions marked with numbers or speeds like 'INT' (intermittent) will allow you to adjust the delay between wiper passes.
Remember, it's crucial to turn off your rear wipers when they're not in use to prevent excessive wear on the wiper blades and related components. To do so, simply return the switch to the OFF position or center the dial when using a dial-type switch.
There you have it – everything you need to know about turning on and using your Toyota Corolla's rear windshield wipers. Now you can enjoy improved visibility and safer driving even when the weather takes a sudden turn. The next time you're caught in a rainstorm, don't hesitate to engage your rear wipers for added peace of mind on the road.