how to turn on audio technica turntable

How to Turn On Audio-Technica Turntable

By Kevin Taylor
AD

So, you're eager to start spinning some vinyl on your new Audio-Technica turntable? You've got a great setup ready, but before you can enjoy those classic records, you need to know how to turn on your turntable. Don't worry, it's straightforward. Let's dive in and get your Audio-Technica turntable up and running.

First, let's cover some basic knowledge about your turntable. Audio-Technica is known for producing high-quality, robust turntables that can handle various vinyl records. Whether you've got a AT-LP120XUSB, AT-LP1240XUSB, or any other Audio-Technica model, the process is similar. Now, let's get started.

Understanding Your Turntable's Components

Before you turn on your turntable, it's crucial to understand its main components. This will not only help you operate it correctly but also troubleshoot any potential issues in the future.

AD
Sony Vs Audio-Technica Turntable (Which Is The Better Value?)
Sony Vs Audio-Technica Turntable (Which Is The Better Value?)
🎵 Experience Vinyl Like Never Before with the Audio-Technica AT-LP60XBT! 🎶✨
🎵 Experience Vinyl Like Never Before with the Audio-Technica AT-LP60XBT! 🎶✨
Manual and Automatic Turntables Explained | Vinyl Restart
Manual and Automatic Turntables Explained | Vinyl Restart

Most Audio-Technica turntables have the following key components:

  • Platter: The record sits on this large, flat surface. When you turn on your turntable, the platter spins the record.
  • Tonearm: This arm, which holds the cartridge (stylus), moves across the record, playing the grooves.
  • Cartridge: The cartridge, or stylus, is the part that actually reads the grooves in the record. It's mounted at the end of the tonearm.
  • Speed Dial/Anti-Skate Dial: These are used to adjust the turntable's playback speed and prevent the stylus from wandering.
  • Start/Stop Button: Located on the platter, this button starts and stops the turntable.

Setting Up Your Turntable Properly

Before you turn on your turntable, make sure it's set up correctly. Start by ensuring the turntable is on a stable, level surface. Place your record on the platter, with the label facing up. Then, gently lower the tonearm so the stylus rests in the record's groove. Remember, never force the stylus into the groove; it should sit lightly on the record.

Complete Turntable Setup for Beginners | Step by Step
Complete Turntable Setup for Beginners | Step by Step
Best Budget Turntables for Superb Sound
Best Budget Turntables for Superb Sound

After setting up your record, adjust the speed dial to match your record's speed (usually 33 RPM for LPs and 45 RPM for 7-inch singles). You can also adjust the anti-skate dial, which helps prevent the stylus from pulling the record out of its groove.

Turning On Your Turntable

Now that your turntable is set up, it's time to turn it on. The process is quite simple. Most Audio-Technica turntables have a power switch on the back, near the mains input. Flip this switch to the "On" position. You should hear a slight hum as the turntable's motor starts up. The platter will begin spinning at the speed you set with the speed dial.

AD

If your turntable is model-specific, like the AT-LP120XUSB, you might have additional switches for direct drive, reverse playback, or phono/line outputs. Familiarize yourself with these features and use them as needed.

Playing Your Records

With your turntable now powered up, you're ready to start playing your records. To start playback, press the start/stop button on the platter. The turntable will begin playing your record. The stylus, now at the record's outer edge, will move towards the center as the track plays. To stop playback, simply press the start/stop button again.

Remember, vinyl records require a gentle touch. Always handle your records by the edges and label areas to avoid leaving fingerprints on the playing surface. Also, regularly clean your stylus to maintain sound quality. You can find guides on how to do this in your turntable's user manual.

AD

Adjusting Volume and Tone Controls

Your Audio-Technica turntable might have built-in preamps, allowing you to connect it directly to powered speakers. In this case, use the volume and tone controls on your turntable to adjust your listening experience. If your turntable is connected to an external amplifier or receiver, use the volume control on that device.

To fine-tune your sound, you can also experiment with the tone controls on your turntable or connected devices. Bass and treble adjustments can help you achieve your desired sound profile. However, keep in mind that adjusting these controls can affect the overall EQ of your system.

Changing Sides and Records

Once a side has finished playing, you'll need to lift the tonearm, stop the turntable, flip the record, and start the process again. To do this, first, press the start/stop button to halt playback. Then, raise the tonearm and carefully remove the record. Flip it over, making sure to match the label orientation. Place the record back on the platter and lower the tonearm.

AD

If you want to change records entirely, follow the same process, but when you've finished playing the second side of the current record, turn off the turntable, and then unplug it from the mains before moving on to your next vinyl.

Now that you know how to turn on your Audio-Technica turntable and start enjoying your vinyl collection, why not explore some interesting records or refine your vinyl care routine? Happy listening!

AD