how to turn on a craftsman lawn mower

How to Start a Craftsman Lawn Mower

By James Jones
AD

Is your Craftsman lawn mower gathering dust and you're eager to get it running again? You're in the right place. In this comprehensive guide, we'll walk you through the steps on how to turn on your Craftsman lawn mower safely and efficiently. By the end, you'll be ready to tackle your lawn with confidence.

Before we dive into the process, remember that safety should always be your top priority. Ensure your mower is in a well-ventilated area, away from flammable materials, and never attempt to start it with the engine running inside a closed garage or any enclosed space.

Preparation: Inspections and Safety Checks

Before you turn on your Craftsman lawn mower, it's crucial to perform a few safety checks and maintenance tasks. These steps will ensure your mower is in optimal condition and ready to use.

AD
a lawn mower sitting on top of a pile of dirt with the words how to fix your lawn mower
a lawn mower sitting on top of a pile of dirt with the words how to fix your lawn mower
How to Start a Craftsman Lawn Mower – Follow 6 Easy Steps
How to Start a Craftsman Lawn Mower – Follow 6 Easy Steps
How to Start a Craftsman Lawn Mower
How to Start a Craftsman Lawn Mower

First, check the oil level using the dipstick located under the mower's hood. Top it up if necessary, ensuring you use the correct type of oil specified in your mower's manual.

Fuel and Spark Plug

Next, check the fuel level. If it's been a while since you've used your mower, عملکرد the gas may have degraded. If so, drain the fuel tank and replace it with fresh gas. Also, inspect the spark plug for any signs of wear or damage. If it's not in good condition, replace it with a new one.

How to Turn Off a Lawn Mower
How to Turn Off a Lawn Mower
a lawn mower with the words how to clean lawn mower carburetor without removing it
a lawn mower with the words how to clean lawn mower carburetor without removing it

Use a spark plug wrench to unscrew the old plug, then clean the area around the hole to remove any dirt or debris. Screw in the new spark plug, ensuring it's tight but not overtightened. Most Craftsman mowers require a 13/16" to 3/4" spark plug.

Air Filter

The air filter keeps dust and debris from entering your mower's engine. A clogged filter can hinder starting and performance. To clean the filter, first remove it from the engine, then gently tap it against a solid surface to dislodge any dirt. Reinstall it once it's clean.

AD

If your filter is extremely dirty or damaged, it's better to replace it with a new one. Always ensure you have the correct type of air filter for your specific Craftsman mower model.

Starting Your Craftsman Lawn Mower

With the necessary checks and maintenance tasks completed, it's time to turn on your Craftsman lawn mower. Here's a step-by-step guide to help you:

Ensure your mower is on a flat surface and the blades are engaged, not in the 'neutral' position. This helps prevent the mower from moving suddenly when the engine starts.

AD

Priming the Engine

Some Craftsman mowers come with a primer bulb, located near the air filter. If yours does, squeeze the bulb several times to prime the engine. This step sends fuel directly into the carburetor, helping start the engine.

If your mower doesn't have a primer bulb, you can still prime the engine by turning the mower's-blade engaged control handle slowly and repeatedly for about 20 seconds. This engages the fuel pump, sending fuel to the carburetor.

Starting the Engine

Once primed, switch the mower's ignition to the 'start' position. On Craftsman mowers, this is usually next to the 'run' position, labeled with a small 'S'.

AD

Pull the starter cord gently but firmly. It should take 1-3 pulls to start the engine. Once the engine starts, let it warm up for a minute or two before using it.

As you start your mower and tack your lawn, remember to follow safe mowing practices. Keep pets and children away from the mower while it's running, and never over-reach or turn off the mower while it's running to avoid accidents.

There you have it. With these steps, you're ready to turn on your Craftsman lawn mower and get your lawn looking neat and well-trimmed. If you encounter any issues or need further help, don't hesitate to consult your mower's user manual or contact a professional for assistance.

AD