how to turn off water line to refrigerator

How to Turn Off Water Line to Refrigerator

By Amanda Wilson
AD

Have you ever needed to replace a water filter in your refrigerator, but couldn't because the water line was still on? To avoid any mess or potential damage, it's crucial to know how to turn off the water line to your refrigerator. In this guide, we'll walk you through the process step by step, ensuring you can access and maintain your refrigerator safely and efficiently.

Before we dive into the details, it's essential to understand that the water shutoff valve for your refrigerator is usually located under the sink where your kitchen's main water supply line is connected. However, in some cases, it might be situated behind the refrigerator itself. Let's explore both scenarios to make sure you're prepared for any situation.

Preparation and Safety Measures

Before you begin, make sure to gather some basic tools you might need, such as a flashlight, pliers, and a bucket to catch any water that might leak. Additionally, it's a good idea to have a towel or two on hand for any spills. Now that you're equipped, let's proceed.

AD
How to Fix Hole in Refrigerator Water Line
How to Fix Hole in Refrigerator Water Line
How to Run Water Line to Fridge Under Floor
How to Run Water Line to Fridge Under Floor
How to Connect a Water Line to a Refrigerator
How to Connect a Water Line to a Refrigerator

Start by unplugging your refrigerator from the power source to ensure there's no risk of electrical shock while working. Next, prepare to catch any remaining water in the line. To do this, place a bucket underneath the shutoff valve and, using a wrench, slowly turn the valve clockwise until it's completely off. As you do this, you should hear a hissing sound as the water remaining in the line is expelled.

Locating the Shutoff Valve Under the Sink

If the valve is under your sink, you might need to remove the kickplate or use a flashlight to locate it. Once you've found it, follow these steps:

the inside of a white refrigerator with water in it's freezer compartment and instructions on how to install a water line for a refrigerator
the inside of a white refrigerator with water in it's freezer compartment and instructions on how to install a water line for a refrigerator
How to Disconnect Water Line From Back of Refrigerator
How to Disconnect Water Line From Back of Refrigerator
  1. Identify the shutoff valve; it's typically a small, brass or chrome fitting on the cold water supply line serving your refrigerator.
  2. Carefully turn the valve clockwise using an adjustable wrench until it stops. This action turns off the water supply to your refrigerator.
  3. If the valve is stiff and won't turn easily, try using penetrating oil, like WD-40, to loosen it. Apply the oil, let it sit for a few minutes, then try turning the valve again.

Locating the Shutoff Valve Behind the Refrigerator

If your shutoff valve is behind the refrigerator, you'll need to move the appliance out from the wall to access it. Follow these steps to do so safely:

  • Start by unplugging the refrigerator and removing any obstacles in your way.
  • Carefully pull the refrigerator away from the wall. You might need to enlist the help of another person to avoid injuring yourself or damaging the appliance.
  • Once you have access to the back of the refrigerator, follow the water line to locate the shutoff valve. This should be a knob or handle that you can turn clockwise to turn off the water.
  • If the valve is hard to turn, you may need to use pliers or a wrench.

Turning off the water line to your refrigerator might seem daunting at first, but with these simple steps, you'll be a pro in no time. Now that you've successfully turned off the water, you're ready to tackle that filter change or any other maintenance tasks your refrigerator needs.

AD

Now That the Water Line is Off

With the water line to your refrigerator now turned off, you can proceed with your maintenance tasks without worry. Keep in mind that you'll need to turn the water back on once you're finished. To do this, simply turn the shutoff valve counterclockwise until it's fully open.

In some cases, you might find that the valve is stuck or won't move easily. If this happens, try using penetrating oil again to lubricate the valve. If it still doesn't budge, it might be a sign that the valve is failing and needs to be replaced. In this case, it's a good idea to consult a professional to ensure the job is done correctly.

Regularly maintaining your refrigerator is essential to keep it running efficiently and ensure the quality of your drinking water. By knowing how to turn off the water line, you're well on your way to becoming a refrigerator maintenance expert. So go ahead, tackle that filter change, and enjoy the peace of mind that comes with knowing you've taken care of your appliance. Happy maintenance!

AD
AD