how to turn off order filter light on whirlpool refrigerator

How to Turn Off Order Filter Light on Whirlpool Refrigerator

By Amanda Thompson
AD

Plagued by the persistent glow of the Order Filter light on your Whirlpool refrigerator? It's time to put an end to this brightness that keeps you awake at night. Don't worry, turning it off is simpler than you think. Let's guide you through this process in a step-by-step, human-friendly way.

Before we dive into the how-to, let's first understand why this light exists. The Order Filter light on Whirlpool refrigerators is designed to remind you to change your refrigerator's water filter every six months. Once it's time for a change, a steady light will burn, nagging you to replace the filter. However, if this constant glow is disrupting your sleep, there's a way to temporarily turn it off. Let's get started.

Understanding Your Refrigerator's Light Settings

Your Whirlpool refrigerator is equipped with a control panel, typically located at the top, bottom, or inside the refrigerator door. Familiarize yourself with this panel, as it holds the key to turning off the Order Filter light.

AD
How To Reset Filter Light On Whirlpool Refrigerator
How To Reset Filter Light On Whirlpool Refrigerator
How to change your Whirlpool LED Refrigerator lights (no tabs)
How to change your Whirlpool LED Refrigerator lights (no tabs)
How To Fix Whirlpool Fridge Flashing Light
How To Fix Whirlpool Fridge Flashing Light

Before we proceed, it's crucial to note that the procedure might vary slightly depending on your refrigerator's model and series. We'll provide a general guide, but for the most accurate steps, always refer to your user manual or contact Whirlpool customer support.

Knowing Your Buttons

The control panel consists of a series of buttons, often labeled with icons or small prints. You'll likely see symbols for Light, Filter, Door Alarm, and other settings. For this process, we're primarily interested in the Light and Filter buttons.

Whirlpool Refrigerator Diagnostic Mode: Troubleshooting Guide
Whirlpool Refrigerator Diagnostic Mode: Troubleshooting Guide
Replace LED Light in Whirlpool Refrigerator - Whirlpool Refrigerator Lights Dim or Blinking
Replace LED Light in Whirlpool Refrigerator - Whirlpool Refrigerator Lights Dim or Blinking

Some refrigerators may have an 'Off' button as well. If your refrigerator has this, you can simply press and hold the 'Off' button for a few seconds to turn off all lights, including the Order Filter light. If not, read on for the detailed process using the Light and Filter buttons.

Preparing for the Process

To ensure a smooth process, make sure your refrigerator is unplugged. This precaution prevents any accidental changes to your refrigerator's settings during the procedure. Once it's unplugged, locate your control panel and identify the Light and Filter buttons.

AD

Next, grab a flathead screwdriver or a similar thin object. Some Whirlpool refrigerators require pressure to be applied on the button while it's being pressed for the light settings to change. A flathead screwdriver can provide the necessary pressure.

Turning Off the Order Filter Light

With everything in place, let's proceed with turning off the Order Filter light.

First, locate the Light button on your control panel. Press and hold this button for a few seconds. You should notice the interior lights of your refrigerator turn off. This indicates that you've successfully accessed the light settings.

AD

Adjusting the Light Settings

With the interior lights off, locate the Filter button (or the button labeled with a water drop icon). Press this button and apply slight pressure while continuing to hold the Light button. You may need to use the flathead screwdriver to achieve this.

While applying pressure, observe the Order Filter light. It should begin to flicker, indicating that the settings for the light are being adjusted. Continue applying pressure for roughly five seconds, then release both buttons.

If the Order Filter light turns off after following these steps, congratulations, you've done it! Your refrigerator's interior should still be well-lit, but the troublesome Order Filter light should no longer bother you at night.

AD

What If The Light Doesn't Turn Off?

If the Order Filter light remains on, don't fret. There might be another issue at hand. The light might still be active because the factory setting for the Order Filter reminder period has not been exceeded. In this case, you might need to change the filter manually to deactivate the light.

Here's how you can do this: Press and hold the Filter button for about ten seconds. This should reset the filter reminder, deactivating the Order Filter light. Ensure you replace your water filter regularly to maintain the functionality and hygiene of your refrigerator.

Remember, turning off the Order Filter light doesn't cancel your responsibility to replace the water filter every six months. Keep an eye on the light, and when it comes back on, make sure you change your filter accordingly. Now, you can enjoy a good night's sleep without the glow of the Order Filter light disrupting your peace. Until it's time to change your filter, that is. Happy zzz's!

AD