how to turn off leviton motion sensor

How To Turn Off Leviton Motion Sensor

By Steven Davis
AD

Are you tired of your Leviton motion sensor illuminating your space unexpectedly or at inopportune times? While these sensors are excellent for automatic lighting control, there may come a time when you want to temporarily or permanently disable them. Here's a step-by-step guide on how to turn off your Leviton motion sensor, ensuring your peace and quiet.

Before we begin, it's crucial to understand that Leviton motion sensors have two primary control modes: 'Always On' and 'Motion-Activated'. The latter is the more common and customizable one, allowing you to turn the sensor off when needed. Let's dive into the process.

Understanding Your Leviton Motion Sensor

Before attempting to turn off your motion sensor, it's essential to familiarize yourself with the different parts of the device. The primary components you should know are the sensor faceplate, the tiny hole for the reset button, the 'Test' and 'Reset' buttons, and the decora-style paddle switch which controls the sensor's power.

AD
How to Turn Off a Motion Sensor Light Without Switch
How to Turn Off a Motion Sensor Light Without Switch
How to Keep Lights On Without Motion Trigger
How to Keep Lights On Without Motion Trigger
How to Cover Motion Sensor Light
How to Cover Motion Sensor Light

Your Leviton motion sensor also has settings that dictate its behavior. The most critical ones are the 'Sensor Time' and 'Lux Level' settings, which regulate how long the light remains on after motion is detected and the minimum light level required to trigger the sensor, respectively.

Accessing the Control Panel

To adjust your sensor's settings or turn it off, you'll need to access its control panel. This is usually located behind the faceplate, which can be removed by gently pulling it towards you. If your sensor is wall-mounted, you may need a small screwdriver to remove the faceplate.

How to Stop a Motion Sensor Light From Turning Off In 10 Easy Hacks
How to Stop a Motion Sensor Light From Turning Off In 10 Easy Hacks
How to Trick a Motion Sensor Light to Stay on
How to Trick a Motion Sensor Light to Stay on

Once the faceplate is off, you'll see the control panel with the 'Test' and 'Reset' buttons. These buttons are used to adjust the sensor's settings, and we'll use the 'Reset' button to turn the sensor off.

Turning Off the Motion Sensor

Turning off the motion sensor involves resetting the device to its default 'Always On' mode. To do this, follow these steps:

AD
  1. Locate the tiny hole on the side or back of your sensor. This is where the reset button is situated.
  2. Press and hold the reset button using a small, sharp object like a paper clip or a pen. Hold it for approximately 5 seconds.
  3. You should hear a short beep or see the LEDs on the sensor flash, indicating that it has entered 'Always On' mode.
  4. Replace the faceplate, and your sensor should now be off. If you want to turn motion detection back on, repeat the reset process and follow the on-screen instructions to switch back to 'Motion-Activated' mode.

It's essential to remember that turning off your motion sensor means you'll need to manually turn on the light when you need it. If you find yourself constantly resetting the sensor, it might be time to consider adjusting its settings or relocating it to a more suitable spot.

Adjusting Your Sensor's Settings

Instead of completely turning off your motion sensor, you might prefer to customize its behavior to suit your needs. This can be done using the 'Sensor Time' and 'Lux Level' settings. Here's how:

Adjusting Sensor Time

The 'Sensor Time' setting dictates how long the light stays on after motion is detected. By default, this is set to 5 minutes. To adjust it, press and hold the 'Test' button until you hear a beep. Then, press the 'Test' button repeatedly to cycle through the available time options (1, 3, or 5 minutes). Once you've selected the desired time, release the 'Test' button.

AD

To test your new setting, wait for the current light cycle to end, then trigger the sensor again. The light should stay on for the duration you selected.

Adjusting Lux Level

The 'Lux Level' setting determines the minimum light level required to trigger the sensor. By default, this is set to 10 lux. To adjust it, press and hold the 'Test' button until you hear two beeps. Then, press the 'Test' button repeatedly to cycle through the available lux options (5, 10, or 15 lux). Once you've selected the desired lux level, release the 'Test' button.

To test your new setting, cover the sensor with your hand or use a light meter to simulate different light levels. The light should turn on only when the lux level falls below your selected threshold.

AD

Now that you know how to turn off your Leviton motion sensor and adjust its settings, you should have no problem enjoying personalized lighting control in your space. Whether you're looking to create a more relaxing atmosphere or need a quick solution to unexpected illuminations, these tips should help you achieve the perfect lighting balance.

AD