How to Disable Intel Rapid Storage Technology
Intel Rapid Storage Technology (Intel RST) is a software feature designed to increase performance and data protection for Intel-based systems. However, there might be instances where you'd like to turn it off, perhaps due to compatibility issues or to save system resources. Here's a step-by-step guide on how to disable Intel RST in both BIOS/UEFI and Windows operating systems.
Before proceeding, ensure you understand the implications. Disabling Intel RST may impact your system's performance and data protection features. Always backup important data before making significant changes to your system.
Disabling Intel RST via BIOS/UEFI
The BIOS/UEFI is the initial software that runs when your computer boots up. Here's how to access it and disable Intel RST:
Note: The steps might vary slightly depending on your system's manufacturer and BIOS/UEFI version. Always refer to your system's user manual if you're unsure.
Accessing BIOS/UEFI
To enter the BIOS/UEFI setup, typically you'll need to press one of the following keys during boot-up: F2, F12, Del, Esc, or one of these followed by another key. The exact key combination may vary, so check your system's documentation or look for an on-screen message during boot-up.
Upon accessing the BIOS/UEFI, look for a configuration related to "Intel RST", "AHCI", or similar. The exact options may vary, but common terms include "Intel® Rapid Storage Technology", "SATA Mode", or "SATA Controller Mode".
Disabling Intel RST in BIOS/UEFI
Once you've found the relevant setting, change it to "AHCI" (Advanced Host Controller Interface). AHCI is a standard interface for connecting host bus adapters to internal storage devices. This should effectively disable Intel RST. Take note of any warning messages and proceed cautiously. Make sure to save your changes and exit the BIOS/UEFI setup. Your system will reboot, and Intel RST should now be disabled.
Disabling Intel RST via Windows Operating System
If you can't or prefer not to disable Intel RST via BIOS/UEFI, you can also do so through the Windows operating system. Here's how:
Accessing Device Manager
Press the Windows key + X on your keyboard, then click on "Device Manager". Alternatively, you can search for "Device Manager" in the Start menu. In Device Manager, find and expand the "Storage controllers" category. Look for the Intel RST driver, such as "Intel Rapid Storage Technology". It might be listed as "Intel (R) RST Driver" or similar.
Disabling the Intel RST Driver
Right-click on the Intel RST driver and select "Uninstall device". If asked, check the box for "Delete the driver software for this device", then click "Uninstall". Restart your computer once the process is complete. Upon rebooting, Windows should automatically install a standard AHCI driver for your SATA devices. Intel RST should now be disabled.
It's essential to monitor your system's performance and stability after disabling Intel RST. If you encounter any issues, you might need to revert the changes or consider other troubleshooting steps.
cartilage fusion