How to Instantly Stop First Alert Alarm
The FirstAlert OneLink alarm, a popular choice for wireless home security, is effective in alerting you to potential threats. However, there might be times when you want to turn it off temporarily, for instance, during a test or when replacing batteries. Here's a step-by-step guide on how to silence your FirstAlert OneLink alarm, ensuring your safety without unnecessary disturbances.
Before we dive into the process, remember that FirstAlert alarms feature a battery backup in case of power outages. This means they won't turn off completely until the backup battery is removed. Let's explore the three main methods to silence your FirstAlert OneLink alarm.
Silencing via Remote Control
The simplest and most convenient way to turn off your FirstAlert OneLink alarm is using its remote control. This device, which comes with the alarm, allows you to arm, disarm, and silence your alarm from a distance.
First, ensure your remote control is within range and has fresh batteries. Then, follow these steps to silence your alarm:
Using the Silence Button
Press and hold the "Silence" button on your remote control for about 3-5 seconds. The alarm will stop, and a confirmation chime will sound, indicating that the alarm has been silenced.
To verify that your alarm is silenced, wait for 5-10 minutes and ensure the alarm does not go off. If the alarm doesn't sound, you can be confident that you've successfully silenced it using the remote control.
Using the Alarm Test Feature
If the silence button doesn't work, you can use the alarm test feature to temporarily disable the alarm. Here's how:
Press and release the "Test/Silence" button quickly, and the alarm will emit a single chirp, acknowledging that the test mode is active. The alarm will now be silenced for a period of about 5-10 minutes. After this period, the alarm will automatically re-arm without sounding.
Silencing at the Alarm
If you're near the alarm and don't have the remote control, you can still silence it directly at the device. Here's how:
Using the Front Panel Buttons
Many FirstAlert OneLink alarm models feature front panel buttons for disarming and silencing the alarm. To silence the alarm using these buttons, press and hold the "Silence" or "Stop" button for about 3-5 seconds. The alarm will cease sounding, and a confirmation chime will play.
Again, wait for 5-10 minutes to confirm that the alarm has been successfully silenced.
Using the Alarm's Test Feature
FirstAlert alarms also allow you to silence the device using its internal test feature. Here's how to do it:
Press and release the "Test/Silence" button quickly. The alarm will emit a single chirp, indicating that the test mode is active. Your alarm will now be silenced for approximately 5-10 minutes before automatically re-arming.
Disabling the Alarm Completely
If you need to disable your FirstAlert OneLink alarm completely, for example, during renovation or maintenance, you'll need to remove the backup battery. This will power down the alarm completely and prevent it from sounding.
Locating the Battery
First, you'll need to locate the backup battery. On most FirstAlert OneLink alarms, the battery compartment is situated on the back or bottom of the device. It may be secured with a screw or a small door.
Carefully open the battery compartment using a screwdriver or by sliding the door open. You should see a 9V battery inside.
Removing the Battery
Gently pull the battery out of its compartment. Once the battery is removed, your FirstAlert OneLink alarm will be completely powered down and unable to sound.
Remember, with the battery removed, your alarm will no longer be protected in the event of a power outage. Reinstall the battery to restore full functionality and protection to your alarm.
With these methods, you should now be able to turn off your FirstAlert OneLink alarm with ease. Always ensure you understand the alarm's current state before leaving or entering your home, and never disable your alarm for extended periods without proper safety measures in place. Stay safe!