Disable Auto Stop on 2020 Chevy Traverse: Step-by-Step Guide
Having trouble with your 2020 Chevy Traverse suddenly stopping while driving? This could be due to the vehicle's auto stop feature, designed to improve fuel efficiency by temporarily shutting off the engine when you're idle. However, you can turn this feature off. Here's a comprehensive guide on how to do so, optimized for SEO to ensure you find the best solutions.
Before you proceed, ensure your engine is off and you're wearing gloves or using a cloth to avoid oil stains on your hands. Also, always consult your vehicle owner's manual before performing any maintenance tasks.
Understanding the Auto Stop Feature
The Auto Stop feature, also known as engine idle stop, is designed to reduce fuel consumption and tailpipe emissions by turning off your engine when you come to a complete stop at a traffic light or in heavy traffic.
While it's an eco-friendly feature, it can be quite jarring, especially in certain driving conditions. Understanding how it works and how to turn it off can help ensure a smoother driving experience.
Identifying the Auto Stop Button
Before you can turn off the feature, you need to locate the Auto Stop button. It's typically marked with an 'A' inside a circle and is usually found in the center console near the gearshift. In your 2020 Chevy Traverse, it should be a small button on the right-hand side of the shifter.
This button allows you to turn the Auto Stop feature on or off. A 'ά' inside a circle icon on your instrument cluster will indicate when the feature is active.
Steps to Turn Off Auto Stop
Now that you've located the button, follow these steps to turn off the Auto Stop feature:
- Press and hold the Auto Stop button for at least 2-3 seconds until the 'ά' icon on the instrument cluster disappears. You might hear a chime or see a message on the driver information center confirming the Auto Stop feature has been turned off.
- When you next restart your vehicle, the Auto Stop feature should be disabled. However, if you want to make sure it's off, you can check your instrument cluster for the absence of the 'ά' icon.
Alternative Methods to Manage Auto Stop
If you find that you occasionally need to use the Auto Stop feature, perhaps for short trips or city driving, you can still manage it to a certain extent without completely turning it off:
Limiting Auto Stop Operations
You can limit the Auto Stop feature to operate only under certain conditions. For instance, you can ensure it doesn't activate when your engine temperature is high or when the air conditioning is on. Here's how:
- Press and hold the Auto Stop button until the message "AV HODE LOCK" or "AUTO VENT HOOD LOCK" appears on your Driver Information Center (DIC).
- If the air conditioning is on, press and release the button to lock out the Auto Stop feature when the air conditioning is in use.
- Turn the ignition to the off position, then turn it back on. Check your DIC to ensure the Auto Stop feature is off.
Using the Eco Mode Button
The Eco Mode button, located near the Auto Stop button, can also help manage the Auto Stop feature. When Eco Mode is activated, the Auto Stop feature operates more frequently to improve fuel efficiency. So, if you turn off Eco Mode, the Auto Stop feature may not activate as often, giving you more control over your vehicle's engine.
To turn off Eco Mode, simply press the button until the 'ECO' indicator light turns off.
Always remember that turning off or limiting the Auto Stop feature might slightly impact your vehicle's fuel efficiency. However, for a smoother and more consistent driving experience, these adjustments can be well worth it.
Lastly, if you're still experiencing issues with your 2020 Chevy Traverse's auto stop feature after following these steps, it might be a good idea to take it to a professional mechanic for a thorough check-up. They can diagnose any potential electrical or mechatronic issues that might be causing the feature to function incorrectly. Safe driving!