how to turn off 4wd low on jeep grand cherokee

Effortlessly Switch Off 4WD Low on Jeep Grand Cherokee

By William Williams
AD

If you're a Jeep Grand Cherokee owner, you might have found yourself in 4WD mode when you only needed 2WD. Maybe you're wondering how to turn off 4WD low. You're in the right place. Here's a simple, step-by-step guide to help you switch back to 2WD.

First, let's understand that your Jeep Grand Cherokee offers two types of 4WD modes: 4WD High and 4WD Low. The low mode is intended for extreme off-road conditions and should only be used when absolutely necessary. For everyday driving, 2WD or 4WD High should suffice. Now, let's get you out of 4WD Low.

Identifying When You're in 4WD Low

Before you start turning things off, make sure your Jeep is indeed in 4WD low. Look at the selector dial on the dash. It should be pointing at '4LO'.

AD
Four Wheel Drive Operation | How To | 2019 Jeep Grand Cherokee
Four Wheel Drive Operation | How To | 2019 Jeep Grand Cherokee
Best Mods For Jeep Cherokee
Best Mods For Jeep Cherokee
a table with instructions for different types of checks
a table with instructions for different types of checks

Your Jeep may also have a 4WD low light illuminated on the dashboard. Check your owner's manual if you're unsure about your specific model's indicators.

Stopping the Vehicle Safely

Never attempt to change driving modes while the vehicle is in motion. Always come to a full stop before toggling between modes. Find a safe spot to pull over before proceeding.

The $5 American SECRET That Make Jeep Engines Last 500,000 Miles (Dealers HATE It)
The $5 American SECRET That Make Jeep Engines Last 500,000 Miles (Dealers HATE It)
8 Things You Didn't Know About Your Jeep Grand Cherokee (Tips & Tricks)
8 Things You Didn't Know About Your Jeep Grand Cherokee (Tips & Tricks)

Engaging or disengaging 4WD while driving can cause a jolt or jerk that could lead to loss of control. Safety first, always!

Checking Your Transmission and Parking Brake

Before attempting to switch out of 4WD low, ensure that your transmission is in neutral (N) or park (P). This is especially important if you're driving an automatic.

AD

Also, apply your parking brake. This is a standard safety precaution to prevent your vehicle from rolling while you're not in the driver's seat.

Engaging 2WD mode

Now that you've prepared your vehicle, it's time to switch from 4WD low to 2WD. Remember, you're looking to disengage the front wheels from the drivetrain, so you'll be going to '2H' mode, which is 2WD high.

Here's how:

AD
  1. Release the parking brake.
  2. Press the brake pedal.
  3. Move the selector dial to '2H'.
  4. Release the brake pedal. Your vehicle should now be in 2WD high mode.

If your Jeep doesn't switch out of 4WD low, double-check that your transmission is indeed in neutral. If it's still not shifting, there might be a problem, and you should seek professional help.

Resetting the 4WD Control Module (If Necessary)

Sometimes, certain components might prevent your Jeep from switching out of 4WD low. If you've verified that everything is in order but your Jeep still won't shift, you might need to reset the 4WD control module.

This involves disconnecting and reconnecting the battery, which should reset the module. However, this is a more advanced procedure that you should only attempt if you're comfortable with it. If you're unsure, consult your owner's manual or seek professional help.

AD

And there you have it! You're now back in 2WD mode. Always remember to switch back to 2WD when you're no longer in tough terrain. It's better for your vehicle's longevity and fuel efficiency. Happy driving!

AD